757004
85
Zoom out
Zoom in
Previous page
1/124
Next page
87
User Manual
5
Terms & Functions
This section explains the terms that may be unfamiliar to the reader. The
symbol indicates that the term is followed only by an explanation, while the sym-
bol indicates that the term is more widely explained; you will also find a briefly
description on how to select the related menu option, listing the operation a keys
sequence with the menu names enclosed between double apices. For example 'MENU'
+ "ADVANCED SETTINGS" + 'ENTER' + "USER POINTS" + 'ENTER' means
that you must press the 'MENU' key, using the cursor key to select the ADVANCED
SETTINGS menu and press 'ENTER' key to access it; then use the cursor key to
select the USER POINTS item and then press the 'ENTER' key to display the User
Points page.
A-B-C-D
Select the A-B-C-D function that allows you to place the A, B, C, D points. In Basic Mode it is possible
to place and delete them (see Par. 3.2), in Advanced Mode it is possible to place, move, navigate and
delete them. (see Par. 4.4).
About (page)
Selects a page that gives information on software and cartography version and general software specifi-
cation (as user points number, routes number and so on). For more information see Par. 1.3.
'MENU' + "About..." + 'ENTER'
Activate Simulation
Enables (On) or disables (Off) the Simulation mode. The default setting is Off.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "SIMULATION" + 'ENTER' + "ACTIVATE SIMU-
LATION" + 'ENTER'
Active Track
Selects the number of the active Track. The default setting is 1.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "ACTIVE TRK" + 'ENTER'
Additional Second Factor (ASF)
Sets the ASF for the slave in the selected chain. The default setting is 0.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "COORDINATE
SYSTEM" + 'ENTER' + "TD" + 'ENTER' + "ASF1/2" + 'ENTER'
Advanced Functions
When it is On the chart plotter works in Advanced Mode, otherwise when it is Off the chart plotter
works in Basic Mode. The default setting is Off.
'MENU' + "BASIC SETTINGS" + 'ENTER' + "ADVANCED FUNCTIONS" + 'ENTER'
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz MAGNUM PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz MAGNUM PRO in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info