757004
88
Zoom out
Zoom in
Previous page
1/124
Next page
90 User Manual
Chain
Selects the chain. The Loran chains are groups of transmitting stations that use timed radio pulse
transmissions. In each of these chains there is a master station and two or more slave or secondary
stations. Stations belonging to a same chain transmit pulses in timing groups: a different time base
identifies each chain. The time base of each chain is the Group Repetition Interval or GRI. This GRI
identifies the chain in unique mode. For example the GRI = 4990 identifies the chain of Central Pacific
zone. The default setting is 9970.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "NAVIGATE" + 'ENTER' + "COORDINATE
SYSTEM" + 'ENTER' + "TD" + 'ENTER' + "Chain" + 'ENTER'
Change (User C-CARD)
Changes the current User C-CARD.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "USER C-CARD" + 'ENTER' + "CHANGE" +
'ENTER'
Chart Boundaries
Enables (On) or disables (Off) the displaying of the Chart Boundaries. Selecting Auto instead, if we are in
background charts only the first charts level contained in the C-CARD are displayed, if we are in a charts
level contained in the C-CARD the next four charts level are displayed. The default setting is On.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Chart Bounda-
ries" + 'ENTER'
Chart Lock
When Chart Lock is On, the available zoom scales are only the ones containing cartographic data.
Instead when Chart Lock is Off, it is possible to zoom down into zoom scales not covered by carto-
graphic data after the last available zoom scale covered by cartographic data. The DSI window, if
present, will show “NO CHART”, when an empty level is entered in the location of map expansion
mode.
'MENU' + "MAP SETTINGS" +'ENTER' + "Other Map Configurations" + 'ENTER' + "Chart Lock"
+ 'ENTER'
Warning
When an empty level is entered, the message “No cartographic coverage” is shown on a window
in a corner of the map display. The warning message is always displayed as long as the current
zoom has no data coverage.
C-Link
Selects the Master unit (Primary Station) or the Slave unit (Secondary Station):
'MENU' + "BASIC SETTINGS" + 'ENTER' + "INPUT/OUTPUT" + 'ENTER' + "C-LINK" + 'ENTER'
+ "Secundary Station/Primary Station" + 'ENTER'
Clear (Track)
To clear the stored track.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "CLEAR" + 'ENTER' +
"YES" + 'ENTER'
COG = Course Over Ground
Direction of the path over ground actually followed by a vessel.
Color (Track)
Selects the desired color for the track.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "TRACK" + 'ENTER' + "COLOR" + 'ENTER'
Compass (menu)
Sets the desired value for Bearing and Magnetic Variation, and selects the Calibration page.
'MENU' + "ADVANCED SETTINGS" + 'ENTER' + "COMPASS + 'ENTER'
88


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lorenz MAGNUM PRO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lorenz MAGNUM PRO in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info