649223

LivarnoLux IAN 113911 Manual

6
Zoom out
Zoom in
Previous page
1/61
Next page
6 GB/IE
Introduction / SafetyIntroduction
LED Ceiling light with
Bluetooth speaker
Introduction
Congratulations on the purchase of your
new device. You have selected a high
quality product. Please be sure to care-
fully read the complete instructions for use. Unfold the
pages with the illustrations. These instructions are
part of the product and contain important information
on setup and handling. Always follow all safety in-
structions. Before using this product for the first time
verify the correct voltage and that all parts are prop-
erly installed. Should you have any questions or you
are unsure about operating the product, please
contact the dealer or service centre. Please keep
these instructions in a safe place and pass them on
to third parties as applicable.
Intended use
This light is only suitable for indoor use in dry and
enclosed spaces. The light can be fastened to any
normally inflammable surface. The electrician in-
stalling the light must not install the light on a moist
or conductive surface! This product is intended for
private household use only.
Scope of delivery
Check immediately after unpacking that the parts
are complete and that the product is in proper con-
dition.
1 LED Ceiling light with Bluetooth speaker
1 Remote control unit
1 Wall bracket for remote control (incl. mounting
materials 1 x 3M adhesive pad, 2 x screws)
2 Batteries (1.5 V; LR03; AAA)
3 Plastic wall plugs
3 Screws (ceiling mounting)
1 Mounting template
1 Decals A, B, C (as mounting aid)
1 Set of assembly instructions and instructions for use
Parts Description
Light:
1
Decals (A, B, C)
2
Mains connection cable (external)
3
Bore marking (1, 2, 3)
4
Recess A, B, C mounting template side edge
5
LED ceiling light
6
Mounting template
7
Logo terminal block
8
Wall plug
9
Screws
10
Terminal block
11
Screw holes
12
Decals (A, B, C) LED ceiling light
Remote control:
13
ON button (lighting)
14
OFF button (lighting)
15
Dimmer + button
16
Dimmer – button
17
30 minute timer button
18
ON button (audio)
19
OFF button (audio)
20
Volume – button
21
Volume + button
22
Select song button (previous)
23
Select song button (next)
24
Pause / Bluetooth Connection Standby button
25
Wall bracket (remote control)
26
3M-Self-adhesive pad
27
Screws (Wall mount)
Technical Data
Item no.: DE-LED-00866
Operating voltage: 220–240 V∼,
50 / 60 Hz
Power: max. 26 Watt (speaker
max. 6 Watt)
Protection class: I /
Protection type: IP20
Dimensions: Ø approx. 40 cm,
height approx. 8 cm
Frequency range
Speaker: 120–20,000 Hz
Bluetooth version: 3.0
… 6 …


Need help? Post your question in this forum.

Forumrules
1

Forum

livarnolux-ian-113911

Reset search

  • After 3 years of use the lamp has started blinking when switched on. The installation is fine, coul it be the transformer. Is it possible to replace it? Submitted on 27-4-2020 at 19:19

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LivarnoLux IAN 113911 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LivarnoLux IAN 113911 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 0,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info