602392
18
Zoom out
Zoom in
Previous page
1/66
Next page
Chapter 3
Advanced Configuration with the Web-based Utility
17
Wireless-N Internet Home Monitoring Camera
Firmware Upgrade
Upgrade Firmware New firmware versions are posted
at www.linksysbycisco.com and can be downloaded for
free. If the Camera is functioning satisfactorily, there is no
need to download a newer firmware version, unless that
version has a new feature that you want to use. Loading
new firmware onto the Camera does not always enhance
its performance.
Linksys recommends that you upgrade the Cameras
firmware within your network; in other words, use a
computer within the Cameras local network. If you
attempt to upgrade the Cameras firmware from a remote
location—using a computer outside of the Cameras local
network—the upgrade will fail.
To upgrade the firmware:
1. Go to the Linksys website, www.linksysbycisco.com,
and download the firmware upgrade file for the
Camera. Then extract the file.
2. From the Setup > Administration screen, click Upgrade
Firmware.
3. You will see the Upgrade Firmware screen. Click Browse
to find the extracted file, and then double-click it.
4. Click Start Upgrade, and follow the on-screen
instructions. To cancel the upgrade, click Cancel.
Setup > Users
The Setup > Users screen lets you designate access rights
for the Camera’s users.
Setup > Users
Users Settings
Use this to assign access rights to the Cameras users.
Allow access by Select how access is to be granted, either
All users or Only users in database. If you select Only
users in database, edit the user database as needed, as
described below.
Users This lists the user database (the users who have
access to the Camera).
Editing the Database
To add a user to the database:
1. Enter the user’s name in the User Name field.
2. Enter the password in the Password and Confirm
Password fields.
3. Click Add User to save the user in the database.
To edit a users record in the database:
1. Select the user from the Users list, then click Edit.
2. Edit the User Name and/or Password as needed.
3. Click Add User to save the updated information.
Other operations:
Clear While editing a users information, click Clear to
clear the User Name, Password, and Confirm Password
fields and start over.
Delete To delete a users record from the database,
select the user from the list, then click Delete.
Delete All To clear the database, click Delete All, then
click OK to confirm.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screens features, click Help.
Setup > Options
The Setup > Options screen allows you to set up and
configure DDNS Service, UPnP configuration, and
Alternate Port settings. DDNS (Dynamic Domain Name
System) lets you assign a fixed host and domain name to a
dynamic Internet IP address.
Setup > Options
DDNS
Enable DDNS Select this option to enable DDNS service
with the Camera.
Service Provider This is the DDNS service provider,
which is preset to TZO.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys WVC80N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys WVC80N in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info