602392
17
Zoom out
Zoom in
Previous page
1/66
Next page
Chapter 3
Advanced Configuration with the Web-based Utility
16
Wireless-N Internet Home Monitoring Camera
Max Frame Rate Select the maximum frame rate for the
camera. Reducing this lowers the amount of bandwidth
required by the camera. The range is from 1 to 30.
NOTE: Video quality and/or performance may
be affected by the number of users connected
to the Camera.
It may be helpful to know the bit rates for video viewing or
recording at different resolutions and image quality levels.
The following table lists these estimated bit rates.
Estimated Bit Rates for Video Viewing or Recording
Resolution Quality Level Bit Rate in kbps
640 x 480 Very High 4000
640 x 480 High 3200
640 x 480 Normal 1200
640 x 480 Low 480
640 x 480 Very Low 160
320 x 240 Very High 1000
320 x 240 High 800
320 x 240 Normal 300
320 x 240 Low 120
320 x 240 Very Low 40
160 x 120 Very High 800
160 x 120 High 400
160 x 120 Normal 200
160 x 120 Low 100
160 x 120 Very Low 40
Mobile Settings
Enable Mobile Streaming Select this option to enable
video streaming to a mobile device.
Video Adjustments
Power Line Frequency Select the power line frequency
(50Hz or 60Hz) used in your region, to improve the picture
quality under fluorescent lighting.
White Balance Select the desired option to match the
current environment and lighting.
Brightness If necessary, you can adjust the brightness to
obtain a better image. For example, if the camera is facing
a bright light, the image may be too dark. In this case, you
can increase the brightness. You can select a Brightness
value between -3 and 3.
Sharpness Select the desired option for the sharpness.
You can select a Sharpness value between -3 and 3.
Options
Enable Microphone Select this to enable audio.
Using
Audio increases the bandwidth requirements slightly.
Enable Time Stamp Select this to display a time stamp
on the video.
Enable Text Display To display text on the video, select
this, then enter up to 20 characters in the field.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screens features, click Help.
Setup > Administration
The Setup > Administration screen allows you to change
the Cameras login name and password, reset the factory
defaults, upgrade the firmware, and set the language.
Setup > Administration
Login
These fields are used to change the login name and
password used to access the Camera. For security purposes,
you should change these from the default values (both set
to admin).
Login Name Enter the login name for the Camera.
Password Enter the password for the Camera.
Verify Password Re-enter the password to verify.
Restore Factory Defaults
Restore Defaults To restore the Camera to its factory
default settings, click Restore Defaults.
NOTE: This will overwrite the Camera’s settings
with the factory defaults.
Any changes you
made to the Cameras settings will be lost; you
will not be able to recover them.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys WVC80N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys WVC80N in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info