602392
15
Zoom out
Zoom in
Previous page
1/66
Next page
Chapter 3
Advanced Configuration with the Web-based Utility
14
Wireless-N Internet Home Monitoring Camera
Video Format
To s
elect the video format, click
the Video Format button,
and
the Video Format window appears. Select either
MPEG-4 or MJPEG, then click Save. To exit without saving,
click the X in the upper-right corner of the window.
Video Format Button
Video Format Window
Setup > Basic
The Setup > Basic screen appears when you click the Setup
tab or Advanced Configuration on the Welcome screen.
The Setup > Basic screen allows you to alter the Camera’s
Device settings, Network settings, Wireless settings, and
Security settings.
Setup > Basic
Edit the settings on this screen as needed. Then, to save
your changes, click Apply. To cancel any unsaved changes,
click Cancel. To get additional information about the
screens features, click Help.
Device Settings
Camera Name You may assign the Camera any name
up to 15 characters long. Unique, memorable names
are helpful, especially if you use multiple Cameras on
the same wireless network.
Description Enter information about the Camera in
this field. You can enter up to 32 characters.
LED Operation This feature allows you to enable or
disable the Cameras LED.
Current Date/Time This displays the Cameras current
date and time. If it is incorrect, click Sync with PC to
use your computer’s date and time.
Time Zone Select the time zone for the Cameras
location.
Adjust for Daylight Saving Time Select this to adjust
the Cameras current time for Daylight Saving Time.
NOTE: You must deselect this option when
Daylight Saving Time ends.
Network Settings
To configure the Cameras network settings, select the
protocol you wish to use from the dropdown menu: IPv4
only, IPv6 only, or IPv4 and IPv6. The default is IPv4
only.
Configuration Type If you want to automatically
assign the Camera an IP address from a DHCP server,
then select Obtain Address Automatically (DHCP)
(default). If you want to assign the Camera a static IP
address, then select Fixed IP Address, and complete
the IP Address, Subnet Mask, Gateway, Primary DNS and
Secondary DNS fields.
Address, Subnet Mask, Subnet prefix length
(IPv6 only), Gateway, Primary DNS, Secondary
DNS Complete these fields if you want to assign the
Camera a static IP address. You need to enter at least
one DNS address.
Wireless Settings
SSID Enter the network’s SSID or network name here.
Network Type Select the networks mode, Ad-hoc or
Infrastructure.
Channel No If the Camera is set to Ad-hoc mode,
select its channel setting from the drop-down menu.
Security Click Edit Security Settings to display the
Wireless Security screen.
Setup > Basic > Wireless Security
The Wireless Security screen is used to configure the
Cameras wireless security settings to match your wireless
network settings. The settings are as follows.
Security Mode Select the wireless security mode used
by your wireless network:
Disable (no wireless security)
WEP
WPA/WPA2 Personal
The method selected determines which other fields are
displayed on the screen. The different security modes
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys WVC80N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys WVC80N in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info