602392

Linksys WVC80N Manual

20
Zoom out
Zoom in
Previous page
1/66
Next page
Chapter 3
Advanced Configuration with the Web-based Utility
19
Wireless-N Internet Home Monitoring Camera
Audio Port To change the Audio Port, enter the new
port number (even values only, from 1024 to 65534) in
the field provided. The default Audio Port, 2242, can be
used for multicasting and does not normally need to be
reconfigured. If this port number needs to be changed,
contact your network administrator.
Time to Live Enter the maximum length of time (usually
measured as the number of network routers that can
be passed before the data arrives at its destination or is
dropped) within which the data must reach its destination.
The value must be from 1 to 255. The default value is 16.
To save your changes, click Apply. To cancel any unsaved
changes, click Cancel. To get additional information about
the screen’s features, click Help.
Setup > Motion Detection
The Setup > Motion Detection screen allows you to
configure the Camera’s motion detection settings.
Setup > Motion Detection
Trigger Motion Detection
Enable Motion Detection Check this box to enable
Motion Detection.
Attachment Type Select the type of attachment to be
sent, either JPEG or Video. If JPEG is selected, a series of
images will be attached to the e-mail as individual files. If
Video is selected, a single video file will be attached.
Frame Rate If the Attachment Type field is set to JPEG,
select the frame rate (number of frames to be captured
per second), from 1 to 5. The default value is 1.
Video Format If the Attachment Type is set to Video,
select the video format, either ASF, MPEG-4, or 3GP.
Pre-Capture Length This refers to video footage up to
the moment when motion is detected. Select how many
seconds’ worth of this video will be saved. This value must
be between 0 and 4 seconds.
Post-Capture Length Select how many seconds’ worth
of video will be saved starting from the moment motion
is detected. This value must be between 1 and 5 seconds.
Interval Enter the time in minutes that must pass
between motion detection events. Valid values are 0-5,
10, or 15. The default is 2. A value of 0 indicates no delay
between events.
Action(s) Select the action(s) to be performed upon
motion detection. Select E-Mail to send an e-mail with a
video attachment to a selected recipient., or select FTP to
send the video to a selected FTP server.
E-Mail Alert
If the Action(s) field is set to E-Mail, fill in the following
fields:
Send To Enter the e-mail address where e-mail will be
sent upon motion detection. You can optionally specify
up to three addresses.
Show “From” as Enter the e-mail address to be used as
the From field in the e-mail to be sent.
Subject Enter the Subject field for the e-mail, consisting
of 48 alphanumeric characters or less.
SMTP Port Number Enter the SMTP port number from 1
to 65535. The default is 25.
SMTP Mail Server If you want to use an SMTP mail server,
check the box next to Specify a SMTP Mail Server. Then
enter the mail server’s name in the field provided.
My Mail Server Requires Authentication If you are using
an SMTP mail server that requires authentication (you
must log in with a username and password), check this
box, then fill in the Account Name and Password fields.
Test E-Mail Click this button to send a test e-mail to the
address indicated by the Send To field.
FTP
If the Action(s) field is set to FTP, fill in the following fields:
FTP Server Enter the FTP server name.
Port Enter the FTP server’s port number.
Login Name and Password Enter the login name and
password for the account on the FTP server.
Passive Mode Select Enable (default) to enable passive
mode, or Disable to disable it.
File Path Name Enter the path to the location where the
file will be saved on the FTP server.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys WVC80N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys WVC80N in the language / languages: English as an attachment in your email.

The manual is 3,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info