612983
76
Zoom out
Zoom in
Previous page
1/289
Next page
7
Advanced Configuration
Linksys WUMC710
Setup > Basic Setup
The first screen that appears is the Basic Setup screen. Use this screen to change
the browser-based utilitys language, or to change the media connectors wired
Ethernet network settings.
Language
Language This is used to set the language displayed by the browser-based
utility. Select the desired language from the drop-down menu.
Network Setup
This section determines if the media connectors IP address is obtained
automatically from a DHCP server, such as your network router (Automatic
Configuration - DHCP), or set manually (Static IP).
Device IP If your network has a DHCP server, such as your network router,
assigning IP addresses to your network devices, then keep the default,
Automatic Configuration - DHCP. The media connector will request an
IP address from the DHCP server (usually the network router). If no DHCP
server is found, then the media connector will use its default static IP address,
10.100.1.1, until it detects a DHCP server and is assigned a dynamic IP address.
If you want to set a permanent static IP address for the media connector, then
select Static IP.
If you select Static IP, then complete the following fields:
Static IP Address Enter a unique IP address that will be used to access the
browser-based utility.
Subnet Mask Enter the subnet mask of your wired network.
Default Gateway Enter the IP address of the default gateway for your
network (in most cases, this is your router).
Click Save Settings to apply your changes, or click Cancel Changes to cancel
your changes.
Wireless > Basic Wireless Settings
Use the Basic Wireless Settings screen to configure the media connectors basic
wireless and security settings.
There are two ways to configure the media connectors settings, manual and
Wi-Fi Protected Setup. Wi-Fi Protected Setup is a feature that makes it easy to
set up your wireless network. If your network router supports Wi-Fi Protected
Setup and uses WPA or WPA2 security, then you can use Wi-Fi Protected Setup
to automatically connect the media connector.
Configuration View To manually configure your wireless network, select
Manual. Refer to Basic Wireless Settings, page 8. To use Wi-Fi Protected
Setup, select Wi-Fi Protected Setup. Refer to Wi-Fi Protected Setup, page 9.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys WUMC710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys WUMC710 in the language / languages: All languages as an attachment in your email.

The manual is 7,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info