612983

Linksys WUMC710 Manual

78
Zoom out
Zoom in
Previous page
1/289
Next page
9
Advanced Configuration
Linksys WUMC710
WEP
WEP is a basic encryption method, which is not as secure as WPA or WPA2.
Key 1 Enter the WEP key of your network.
Tx Key Key 1 is the transmit key used by the media connector.
Authentication The default is Open, which uses open system authentication,
so the sender and recipient do not use a WEP key for authentication. Select
Shared to use shared key authentication, in which the sender and recipient
use a WEP key for authentication. Select Auto to allow either Open system or
Shared key authentication to be used.
Click Save Settings to apply your changes, or click Cancel Changes to cancel
your changes.
Wi-Fi Protected Setup
There are two methods available. Use the method that applies to the router
you are using.
Method #1
Use this method if your router has a Wi-Fi Protected Setup button.
1.
Click or press the Wi-Fi Protected Setup button on the router.
2.
Within two minutes, click the Wi-Fi Protected Setup button on the
media connector’s Wi-Fi Protected Setup screen.
3.
After the media connector has been configured, click Close.
The Wi-Fi Protected Setup screen displays the Link Status, Network Name (SSID),
and Security method.
Method #2
Use this method if your router requests the PIN number of the media connector.
1.
On the router’s Wi-Fi Protected Setup screen, enter the PIN number on
the media connector’s Wi-Fi Protected Setup screen. Then click Register
or the appropriate button. (It is also listed on the label on the bottom of
the media connector.)
2.
On the media connector’s Wi-Fi Protected Setup screen, click OK.
3.
After the media connector has been configured, click Close.
The Wi-Fi Protected Setup screen displays the Link Status, Network Name (SSID),
and Security method.
… 78 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys WUMC710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys WUMC710 in the language / languages: All languages as an attachment in your email.

The manual is 7,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info