612980
16
Zoom out
Zoom in
Previous page
1/41
Next page
Chapter 3
Advanced Configuration
13
Wireless-N Access Point with Dual-Band
Before upgrading the firmware, download the Access Point’s
firmware upgrade file from www.linksysbycisco.com.
Firmware Upgrade
Please select a file to upgrade the firmware Click
Browse and select the firmware upgrade file. Then c
lick
Start to Upgrade and follow the on-screen instructions.
WARNING: The firmware upgrade must not
be interrupted; do not reboot or power off the
Access Point during the firmware upgrade..
Status > Access Point
The Access Point’s current status information is displayed.
Status > Access Point
Access Point Information
Firmware Version The Access Points current firmware
version is displayed.
Local Network
Local MAC Address The Access Point’s MAC Address, as
seen on your local, wired Ethernet network, is displayed.
Access Point IP Address The Access Points IP Address, as
seen on your local network, is displayed.
Subnet Mask The Subnet Mask configured for your local
network is displayed.
Default Gateway The Default Gateway configured for
your local network is displayed.
Status > Wireless Network
Information about your wireless network is displayed.
Status > Wireless Network
MAC Address The Access Point’s MAC Address, as seen
on your local, wireless network, is displayed.
Mode The wireless mode used by the network is
displayed.
Network Name (SSID) The wireless network name or
SSID is displayed.
Wireless Band The radio band used the Access Point is
displayed.
Channel Width The channel width setting, in MHz, is
displayed.
Wide Channel Depending on the channel settings of
your Access Point, the Wide Channel is displayed.
Standard Channel The Standard Channel setting is
displayed.
Security The security method used by the Access Point
is displayed.
SSID Broadcast The status of SSID broadcast (enabled or
disabled) is displayed.
Status > About
Information about the browser-based utility is displayed.
Status > About
Web Server
Powered By The web server of the browser-based utility
is displayed.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys WAP610N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys WAP610N in the language / languages: English as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info