602177
29
Zoom out
Zoom in
Previous page
1/81
Next page
Chapter 5
Advanced Configuration
23
8-Port 10/100/1000 Gigabit Switch with Webview
Admin Status Indicates whether PoE is enabled or
disabled on the port.
Priority Indicates the PoE priority setting of the port. The
possible values are: Critical, High and Low. The default is
Low.
Power Allocation (milliwatts) Indicates the actual
amount of power the device can supply.
Mode Indicates whether the port is enabled to utilize
PoE.
Power Consumption (milliwatts) Indicates the amount
of the power used by the device.
NOTE: The Modify PoE Page displays the
currently configured PoE ports. This option is
only seen on the SRW208P and SRW208MP.
VLAN Management > Create VLAN
The Create VLAN screen provides information and global
parameters for configuring and working with VLANs.
VLAN Management > Create VLAN
Single VLAN
VLAN ID (2-4094) Indicates the ID number of the VLAN
being configured. Up to 256 VLANs can be created. This
field is used to add VLANs one at a time. To add the defined
VLAN ID number, press the Add button.
VLAN Name Displays the user-defined VLAN name.
VLAN Range
VLAN Range. Indicates a range of VLANs being configured.
To add the defined range of VLAN ID numbers, press the
Add Range button.
VLAN Table
The VLAN Table displays a list of all configured VLANs. The
VLAN ID, VLAN Name, and status of the VLAN are displayed
here. To remove a VLAN, click the Remove button.
VLAN Management > Port Settings
VLAN Management > Port Settings
The VLAN Port Settings screen provides parameters for
managing ports that are part of a VLAN. The port default
VLAN ID (PVID) is configured on the VLAN Port Settings
screen. All untagged packets arriving to the device are
tagged by the ports PVID.
Port The port number included in the VLAN:
Mode Indicates the port mode. Possible values are:
General The port belongs to VLANs, and each VLAN
is user-defined as tagged or untagged (full 802.1Q
mode).
Access The port belongs to a single untagged VLAN.
When a port is in Access mode, the packet types which
are accepted on the port (packet type) cannot be
designated. It is also not possible to enable/disable
ingress filtering on an access port.
Trunk The port belongs to VLANs in which all ports are
tagged (except for an optional single native VLAN).
Acceptable Frame Type Packet type accepted on the
port. Possible values are:
Admit Tag Only Indicates that only tagged packets
are accepted on the port.
Admit All Indicates that both tagged and untagged
packets are accepted on the port.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys SRW2008MP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys SRW2008MP in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info