602177
27
Zoom out
Zoom in
Previous page
1/81
Next page
Chapter 5
Advanced Configuration
21
8-Port 10/100/1000 Gigabit Switch with Webview
Max Capability Indicates that the port speeds and
duplex mode settings can be accepted.
10 Half Indicates that the port is advertising a 10Mbps
half duplex mode setting.
10 Full Indicates that the port is advertising a 10Mbps
full duplex mode setting.
100 Half Indicates that the port is advertising a
100Mbps half duplex mode setting.
100 Full Indicates that the port is advertising a
100Mbps full duplex mode setting.
1000 Indicates that the port is advertising a 1000Mbps
full duplex mode setting.
Current Advertisement The port advertises its
capabilities to its neighbor port to begin the negotiation
process. This field displays the current advertisement
settings.
Neighbor Advertisement The neighbor port (the port
to which the selected interface is connected) advertises
its capabilities to the port to start the negotiation process.
This field displays the neighbor’s current settings.
Back Pressure The Back Pressure feature of the selected
port can be enabled or disabled.
Current Back Pressure Displays whether Back Pressure is
enabled or disabled on the currently selected port.
Flow Control The Flow Control feature of the selected
port can be enabled or disabled.
Current Flow Control Displays whether Flow Control is
enabled or disabled on the currently selected port.
MDI/MDIX Select the Auto setting if you want the port
to automatically detect the cable type. Select MDI if the
port is connected to an end station. Select MDIX if the
port is connected to a hub or another switch.
Current MDI/MDIX This is the current MDI/MDIX status
of the port.
PVE When a port is a Private VLAN Edge (PVE) port,
it bypasses the Forwarding Database and forwards all
unicast, multicast, and broadcast traffic to an uplink.
Click the Save Settings button to save your changes.
Port Management > Link Aggregation
Port Management > Link Aggregation
LAG This indicates if the port is part of a LAG.
Description Description for this LAG.
Admin Status The admin status of the LAG. Up indicates
that the LAG is available. Down indicates that administrator
has taken the port offline. When modifying the option, be
sure to click the Save Settings option.
Type The type of LAG is displayed here.
Link Status The link status is displayed here.
Speed The connection speed is displayed here.
Duplex The connection duplex is displayed here.
Flow Control This is the flow control status of the LAG. It
is active when the port uses Full Duplex Mode.
LAG Mode Displays the LAG status, On, Off, or Not
Present.
Detail button The Detail button opens up the Link
Aggregation Detail screen.
Link Aggregation Detail
LAG Configuration
LAG The number of the selected LAG.
Description A general description can be listed here for
reference.
LACP Indicates if the LAG is in LACP (Link Aggregation
Control Protocol) mode.
LAG Type The port types that comprise the LAG.
Administrative Status Enables or disables traffic
forwarding through the selected LAG.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys SRW2008MP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys SRW2008MP in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info