602177
26
Zoom out
Zoom in
Previous page
1/81
Next page
Chapter 5
Advanced Configuration
20
8-Port 10/100/1000 Gigabit Switch with Webview
Speed The connection speed of the port is displayed here.
The speed can be configured only when auto-negotiation
is disabled on that port.
Port Management > Port Settings
Duplex This is the port duplex mode, Full (transmission
occurs in both directions simultaneously) or Half
(transmission occurs in only one direction at a time). This
mode can be configured only when auto-negotiation is
disabled and port speed is set to 10Mbps or 100Mbps.
It cannot be configured on Link Aggregation Groups
(LAGs).
MDI/MIDX This is the MDI/MDIX status of the port. The
MDI setting is used if the port is connected to an end
station. The MDIX setting is used if the port is connected
to a hub or another switch.
Flow Control This is the flow control status of the port. It
is active when the port uses Full Duplex Mode.
LAG This indicates if the port is part of a LAG.
Type Displays the port type.
PVE When a port is a Private VLAN Edge (PVE) port,
it bypasses the Forwarding Database and forwards all
unicast, multicast, and broadcast traffic to an uplink.
Uplinks can be ports or LAGs.
Detail The Detail button will open the Port Configuration
Detail screen.
Port Configuration Detail
Port Management > Port Configuration
Port The number of the port.
Description Displays a brief description of the port (can
be entered by clicking on the Detail button).
Port Type This is the port type.
Admin Status The port can be taken offline by selecting
the Down option. When Up is selected, the port can be
accessed normally.
Current Port Status The current status of the port is
displayed here.
Reactivate Suspended Port If you want to reactivate a
port that has been suspended, click the checkbox.
Operational Status This indicates whether or not the
port is active.
Admin Speed Change the speed of the port here.
Current Port Speed The current speed of the port is
displayed here.
Admin Duplex Change the duplex mode here.
Current Duplex Mode This is the duplex mode of the
port.
Auto Negotiation You can enable or disable the port’s
Auto Negotiation feature. If using an SFP module, Auto
Negotiation for the specific port should be set to Disable.
Current Auto Negotiation This is the current setting of
the ports Auto Negotiation feature.
Admin Advertisement Specifies the capabilities to be
advertised by the port. Multiple options may be selected
or Max Capability can be selected to cover all of the
options. The available options are:
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys SRW2008MP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys SRW2008MP in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info