602177
31
Zoom out
Zoom in
Previous page
1/81
Next page
Chapter 5
Advanced Configuration
25
8-Port 10/100/1000 Gigabit Switch with Webview
LAG Indicates if the port is a member of a LAG. If it is a
member of a LAG, it cannot be configured to a VLAN. The
LAG to which it belongs can be configured to a VLAN.
Join VLAN Detail
The Join VLAN Detail screen allows you to select the VLAN
for the port selected and determine whether it is tagged
or untagged. It will be displayed with a T if it is tagged and
with a U if it is untagged.
Join VLAN Detail
VLAN Management > GVRP
GARP VLAN Registration Protocol (GVRP) is specifically
provided for automatic distribution of VLAN membership
information among VLAN-aware bridges. GVRP allows
VLAN-aware bridges to automatically learn VLANs to
bridge ports mapping, without having to individually
configure each bridge and register VLAN membership.
VLAN Management > GVRP
The Global System LAG information displays the same
field information as the ports, but represent the LAG GVRP
information.
The GVRP screen is divided into two areas, GVRP and GVRP
Table. The field definitions for both areas are the same.
Enable GVRP Enables and disables GVRP on the device.
Interface DIsplays the interface on which GVRP is
enabled. The possible field values are:
Port Indicates the port number on which GVRP is
enabled.
LAG Indicates the LAG number on which GVRP is
enabled.
GVRP State When the checkbox is checked, GVRP is
enabled on the interface.
Dynamic VLAN Creation When the checkbox is checked,
Dynamic VLAN creation is enabled on the interface.
GVRP Registration When the checkbox is checked, VLAN
registration through GVRP is enabled on the device.
The Update button adds the configured GVRP setting to
the table at the bottom of the screen.
Statistics > RMON Statistics
The RMON Statistics screen contains fields for viewing
information about device utilization and errors that
occurred on the device.
Statistics > RMON Statistics
Interface Indicates the device for which statistics are
displayed. The possible field values are:
Port Defines the specific port for which RMON
statistics are displayed.
LAG Defines the specific LAG for which RMON
statistics are displayed.
Refresh Rate Defines the amount of time that passes
before the interface statistics are refreshed. The possible
field values are:
No Refresh Indicates that the RMON statistics are not
refreshed.
15 Sec Indicates that the RMON
statistics are refreshed every 15 seconds.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys SRW2008MP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys SRW2008MP in the language / languages: English as an attachment in your email.

The manual is 4,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info