727826
39
Zoom out
Zoom in
Previous page
1/77
Next page
35
System Management
Linksys
SNMP
Go to Configuration > System Management > SNMP page to set up SNMP
(Simple Network Management Protocol). SNMP refers to network management
communications protocol, and it is also an important network management
item. Through SNMP communications protocol, programs with network
management, such as SNMP browser, can help communications of real-time
management. The device supports standard SNMP v1/v2c and is consistent
with SNMP network management software
NOTE Remember to click Save before leaving the page. You can also click
Cancel to undo the changes.
Enabled SNMP: Enable SNMP feature. Enabled is the default.
System Name: Set the name of the device, e.g., Linksys.
System Contact: Set the name of the person who manages the
device, e.g., Tom.
System Location: Define the location of the device, e.g., Irvine.
Get Community Name: Set the name of the group or community that
can view the device SNMP data. The default
setting is "Public".
Set Community Name: Set the name of the group or community that
can receive the device SNMP data. The default
setting is "Private".
Trap Community Name: Set user parameters (password required by the
Trap-receiving host computer) to receive Trap
message.
Send SNMP Trap to: Set one IP address (IPv4 or IPv6) or Domain
Name for the Trap-receiving host computer.
SSL Certificate
You can configure SSL certificates here.
NOTE Remember to click Save to save your settings before leaving the page.
You can also click Cancel to leave without any change.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys LRT224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys LRT224 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info