727826
37
Zoom out
Zoom in
Previous page
1/77
Next page
33
System Management
Linksys
Bandwidth Management
You can configure upstream and downstream bandwidth and set Quality of
Service (QoS) rules in this page.
NOTE Remember to click Save to save your settings before leaving the page.
You can also click Cancel to leave without any change.
The Maximum Bandwidth Provided by ISP
Input the maximum upstream and downstream bandwidth which users applied
for from ISP. The default is 512 kbit/sec.
NOTE The unit of calculation in this example is Kbit. Some software indicates
the downstream/upstream speed with the unit KB. 1KB = 8Kbit.
Bandwidth Management Type
There are two types of QoS: Rate Control and Priority.
• Rate Control: Configure minimum (guaranteed) bandwidth and
maximum (limited) bandwidth for Specified IP address or Service Port.
Interface: Select on which WAN the QoS rule should
be executed. It can be a single selection or
multiple selections.
Service: Select a service to manage. If the bandwidth
for all services of each IP is to be controlled,
select All (TCP&UDP) 1~65535”. You can also
click Service Management to add service
items.
IP Address: Select which user is to be controlled. If only
a single IP is to be restricted, input this IP
address in both fields, such as “192.168.1.100
to 192.168.1.100”. If an IP range is to
be controlled, input the range, such as
“192.168.1.100 ~ 192.168.1.150”. If all Intranet
users that connect with the device are to be
controlled, input “0” in the boxes of IP address.
Direction: Upstream: outbound traffic.
Downstream: inbound traffic.
Min. & Max. Rate: (Kbit/Sec) The minimum bandwidth rule guarantees
minimum available bandwidth.
The maximum bandwidth rule restricts
maximum available bandwidth.
Enable: Click to enable the rule.
Add to list: Add this rule to the list.
Delete: Click to delete an existing entry.
Update: Select the entry that you would like to modify.
Change the setting and click Update. Clicking
Add New deselects the entry and clears the
text fields.
View: Click Refresh to update the display or Close
to return to configuration page.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys LRT224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys LRT224 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info