727826
41
Zoom out
Zoom in
Previous page
1/77
Next page
37
Port Management
Linksys
37
Port Management
Port Setup
The default port settings will be sufficient for most small businesses, but you
can still use the Port Management > Port Setup page to customize these settings.
You can disable a port or customize its priority, speed, duplex mode, and auto-
negotiation settings. You can also enable port-based VLANs to control traffic
between devices on your network.
NOTE Remember to click Save to save your settings before leaving the page.
You can also click Cancel to undo the changes.
Enter the following settings, as needed:
Disable: Check this box to disable a port. By default, all ports
are enabled.
Priority:(for LAN ports
only)
Use this setting to ensure Quality of Service by
prioritizing the traffic for devices on particular ports.
For example, you might assign High priority to a
port that is used for gaming or videoconferencing.
For each port, select the appropriate priority level,
High or Normal. The default setting is Normal.
Speed: If you want to adjust this setting, first uncheck
the Enable box in the Auto Negotiation column
to disable auto-negotiation. Then select the port
speed: 10Mbps, 100Mbps or 1000Mbps.
Duplex: If you want to set the duplex mode, first uncheck
the Enable box in the Auto Negotiation column to
disable auto-negotiation. Select the duplex mode,
Half or Full.
Auto Neg.: Check the Enable box to allow the router to auto-
negotiate connection speeds and duplex mode.
This feature is enabled by default.
VLAN: (for LAN ports
only)
All LAN ports are on VLAN 1 by default. To place a
port on a separate VLAN, choose a VLAN from the
drop-down list.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys LRT224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys LRT224 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info