727826
28
Zoom out
Zoom in
Previous page
1/77
Next page
24
Setup
Linksys
IPv4
IPv6
Outgoing Mail Server
The router allows log messages and OpenVPN client’s configuration file (.ovpn)
to be sent to external email address. You can configure outgoing mail server by
going to Configuration > Setup > Outgoing Mail Server.
IPv6 Transition
When Dual-Stack IP is enabled on the Setup > Network page, a 6to4 tunnel
is enabled by default for IPv6 packets via 6to4 source/destination addressing
exchange. This feature allows the router to establish auto-tunnel in IPv4
network (or a real IPv4 Internet connection) across two independent IPv6
networks. Use the Setup > IPv6 Transition page to disable or enable this
feature.
IPv6 Transition establishes a 6to4 tunnel that enables two IPv6 networks to
communicate through IPv4 infrastructure. When you enable dual-stack IP, IPv6
transition will be turned on by default.
Check the box to enable the 6to4 tunnel, or uncheck the box to disable.
box to disable.
You have to enable Managed RA flags to support auto-configuration to get
the 6to4 prefixes (Please refer to Router Advertisement), such as 2002:[IPv4
WAN IP in hex number]::.
NOTE Remember to click Save before leaving the page. You can also click
Cancel to undo the changes.
Sender Email address of sender.
Mail Server: Hostname or IP address of SMTP mail server. For
Google’s SMTP server, you can find the information
from Google support page at https://support.google.
com/a/answer/176600?hl=en
Authentication: Authentication type, such as Login Plain, TLS and SSL.
SMTP Port: 1~65535 can be accepted. The default value is 25.
Username: Username for authentication.
Password: Password for authentication.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Linksys LRT224 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Linksys LRT224 in the language / languages: English as an attachment in your email.

The manual is 4,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info