693631
62
Zoom out
Zoom in
Previous page
1/82
Next page
POD Farm 2 Basic User Guide - POD Farm 2 & POD Farm Elements Plug-Ins
3•37
POD Farm 2 Plug-In Parameter List
Parameter Type Parameter Name Parameter Description
Assignable Knob Parameters Knob: 1 thru Knob: 16 Each can be assigned to any supported
variable parameter
Assignable Switch Parameters Sw: 1 thru Sw: 16 Each can be assigned to any supported
on/off parameter
Fixed Parameters Master Input Plug-In Input Volume
Master Output Plug-In Output Volume
Tone A Level Tone A Output Level
Tone B Level Tone B Output Level
Tone A Balance Tone A Output Panning
Tone B Balance Tone B Output Panning
Tone A Mute Tone A Output Mute
Tone B Mute Tone B Output Mute
Assigning Parameters to Automation Slots
Before you’ll be able to utilize your DAW host’s track automation for POD Farm 2 “knob” or “switch”
parameters, it is necessary to first assign the desired parameters to Automation Slots. To assign a POD
Farm 2 Plug-In amp, preamp or effect parameter to an Automation Slot:
Load the desired Amp, Preamp or Effect model into the POD Farm 2 Panel View.
Right click (Windows
®
) or Ctrl+click (Mac
®
) directly on the desired POD Farm 2 knob or
switch control to bring up the Automation menu. The menu displays a list of 16 Knob or Switch
Automation Slots (pertaining to the type of control you’ve selected). Initially, these Slots are all
empty (un-assigned to any parameter).
Click within any Slot to “assign” the chosen control. Note that clicking in an occupied Slot will
overwrite an existing assignment with your new control assignment.
Right click (Windows
®
)
or Ctrl+click (Mac
®
)
directly on the desired
knob or switch
control to access the
Automation menu
An arrow at the left
of the slot number
indicates the “selected”
slot. Clicking Clear in
the menu will remove
the selected Slot as-
signment.
POD Farm 2 Plug-In - assigning a knob parameter to an Automation Slot
The name within the Slot provides descriptive information about the assigned parameter. For
example, the assigned knob parameter in the above screenshot: B - Analog Delay w/Mod (FX-
5) - Mix, refers to the “Mix” parameter of the “Analog Delay w/Mod” effect. The “B” indicates
this model is in Tone B, and the “(FX-5)” indicates the specic effect model instance (see the
Model Instance description on page 3•39).
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Line 6 POD Farm 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Line 6 POD Farm 2 in the language / languages: English as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Line 6 POD Farm 2

Line 6 POD Farm 2 User Manual - Dutch - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info