693631
81
Zoom out
Zoom in
Previous page
1/82
Next page
POD Farm 2 Basic User Guide - Standalone Operation
4•10
The MIDI control settings that are required to access the pre-configured Global MIDI assignments are
as follows:
POD Farm 2 Global Parameter MIDI Command
Tap Tempo - Tap repeatedly to set the System Tempo MIDI CC 4, Values 127 = On, 0 = Off
A/B Switch - Switches between Tone A & Tone B MIDI CC 16, Values 127 = B, 0 = A
Tuner View display - Toggles Tuner display On/Off MIDI CC 17, Values 127 = On, 0 = Off
Tone A Level - Adjusts Tone A output level MIDI CC 7, Value 0 thru 127
Tone B Level - Adjusts Tone B output level MIDI CC 7, Value 0 thru 127
POD Farm 2 standalone application - pre-configured Global MIDI assignments
As you can see in the table above, both the Tone A & B Levels can be accessed by a MIDI CC 7
command. This allows you to set a MIDI expression pedal to transmit CC 7 to control both Tone
output levels simultaneously! If your current POD Farm 2 configuration includes only a single Tone,
then the Tone B Level, and A/B switch assignments will not perform any action.
FBV MkII Users: All MIDI commands listed in the above table are included in the “POD Farm
2-Shortboard” FBV Control preset for Shortboard. The Tone A & B Level MIDI commands are included
in the “POD Farm 2-Express” FBV Control preset for the Express (see “MIDI Controller Devices” on
page 3•29
).
MIDI Learn
POD Farm 2 in standalone operation offers MIDI Learn functionality, which allows you to assign
your MIDI device’s pedals, knobs and switches to POD Farm 2 parameters in just a few clicks of the
mouse. You can use MIDI Learn to create your own mappings to POD Farm 2 “Local” and “Global”
parameters. The functionality is the same as described for POD Farm 2 Plug-In - please refer to the
POD Farm 2 Plug-In chapter’s “MIDI Learn” on page 3•31 for details.
MIDI Control for Setlist & Preset Navigation
Just like the POD Farm 2 Plug-In, the POD Farm 2 standalone application also offers the same options
for using your external MIDI controller device to navigate through Setlists & their Tone Presets.
Please see “MIDI Control for Setlist & Preset Navigation” on page 3•33.
In addition to the POD Farm 2 Plug-In options, we’ve also created some pre-configured Global MIDI
assignments for accessing Setlists and Presets in the POD Farm 2 standalone application. Set your
MIDI controller device’s switches to send the following MIDI CC values to access these navigation
settings. You’ll also be able to see these settings within the MIDI Assignments View (see next section).
POD Farm 2 Global Parameter MIDI Command
Next Preset MIDI CC 20, Values 127 = On, 0 = Off
Previous Preset MIDI CC 21, Values 127 = On, 0 = Off
Next Setlist MIDI CC 27, Values 127 = On, 0 = Off
Previous Setlist MIDI CC 26, Values 127 = On, 0 = Off
81


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Line 6 POD Farm 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Line 6 POD Farm 2 in the language / languages: English as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Line 6 POD Farm 2

Line 6 POD Farm 2 User Manual - Dutch - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info