693631

Line 6 POD Farm 2 Manual

61
Zoom out
Zoom in
Previous page
1/82
Next page
POD Farm 2 Basic User Guide - POD Farm 2 & POD Farm Elements Plug-Ins
3•36
Local & Global MIDI Assignments - As described on page 3•33, POD Farm 2 parameters are defined as
either “Local” or “Global.” Therefore, creating a MIDI assignment to a POD Farm 2 parameter follows
this Local or Global behavior. A MIDI assignment cannot be changed between Local or Global.
• Local MIDI assignments appear in yellow text. These are saved with the current Tone Preset
and, therefore, do not persist when you change to a different Tone Preset. You’ll want to be sure
to Save your Preset before switching to another Preset or exiting POD Farm 2 to retain Local
MIDI assignments.
• Global Assignments appear in white text and are indicated as “Global” within the Region
column of the MIDI Assignments display. Global assignments are not saved with the current
Tone Preset, but rather persist regardless of the Tone Preset you are using for the current POD
Farm 2 Plug-In instance. Note that these Global assignments remain intact only within the
current POD Farm 2 Plug-In instance, and are saved with your DAW project, unless you choose
to clear the assignments or remove the instance of the Plug-In. please see .
Once one or more MIDI control assignments are created, if you adjust the knob, pedal or switch on
your MIDI hardware, you’ll see the mapped assignment become highlighted in the MIDI Assignments
window. This provides a handy reference to see what mappings have been created in the current Tone!
POD Farm 2 Plug-In Parameter Automation
Most DAW applications offer parameter automation capabilities for Plug-Ins, where you can specify on
your DAW track to change one or more of the Plug-In’s knob or switch values over time using editable
track envelopes. Most DAWs further allow you to record parameter automation in real-time, where
you enter an automation “write” mode and then all changes to the selected Plug-In’s parameters are
recorded and displayed on the track as adjustable envelopes. This allows all these parameter changes
to be played back and incorporated into your project’s mix down.
DAW host applications typically allow you to access the list of automatable parameters for any AU/
VST/RTAS Plug-In by way of an automation parameter menu, specific to the audio or aux track where
you have inserted the Plug-In. Each DAW host software offers parameter automation options slightly
differently, so it is recommended you consult your host software’s documentation for their specific
instructions and parameter automation capabilities.
POD Farm 2 Assignable Automation Slots
Since POD Farm 2 offers a very large number of automatable parameters for its many amp, preamp and
effects models, you’ll see that we’ve added assignable “Knob” and “Switch” Automation Slots within
POD Farm 2 Plug-In. Each Automation Slot menu allows you to select from among the vast number
of POD Farm 2 amp, preamp or effect model parameters.
• 16 Knob Automation Slots allow you to assign “variable” type controls, such as the Mix knob of
any effect, or the Drive knob of an amp.
• 16 Switch Automation Slots allow you to assign “On/Off” switches, such as the bypass switch for
any model, or the A/B switch.
In addition to the 32 assignable Automation Slots, POD Farm 2 Plug-In also presents several additional
“fixed” parameters within your DAW host’s parameter menu. Where POD Farm 2 Plug-In is inserted
on any DAW track, this total list of parameters appears in your DAW’s track automation parameter
menu as follows.
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Line 6 POD Farm 2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Line 6 POD Farm 2 in the language / languages: English as an attachment in your email.

The manual is 4,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Line 6 POD Farm 2

Line 6 POD Farm 2 User Manual - Dutch - 82 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info