552439
11
Zoom out
Zoom in
Previous page
1/24
Next page
10
4. Handlebar, Front/Rear Decorative Covers for Handlebar Post, and Computer
Installation
Place the Handlebar (4) through clamp on the top end of the Handlebar Post (14). Connect
the Computer Extension Wire II (3) from the Handlebar Post (14) to the Computer Extension
Wire III (15) from the Handlebar (4). Hold the Handlebar (4) in desired position and fasten
Rear/Front Decorative Covers for Handlebar Post (12A, 12B), M8x75 Handlebar T-Knob (9),
and Ø12x1.5x50 Spacer (10) onto clamp and tighten Rear/Front Decorative Covers for
Handlebar Post (12A, 12B) with one ST4.2x20mm Screw (7) and eight ST2.9x16mm Screws
(27). Tighten screws with the Multi Hex Tool with Phillips Screwdriver provided.
NOTE: M8x75 Handlebar T-Knob should be tightly secured before using.
Connect the Hand Pulse Sensor Wires (6) and Computer Extension Wire III (15) to the wires
that come from the Computer (1). Then install the Computer (1) to the Handlebar (4) by
inserting the Computer (1) into the Handlebar (4), using two ST4.2x20mm Screws (7).
Tighten screws with the Multi Hex Tool with Phillips Screwdriver provided.
Hardware:
3 Screws (ST4.2x20mm)
8 Screws (ST2.9x16mm)
12A
27
7
27
12B
10
9
6
4
7
7
15
15
1
3
6
14
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Transport Pro Magnetic Upright Bike 20690 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Transport Pro Magnetic Upright Bike 20690 in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info