552439
9
Zoom out
Zoom in
Previous page
1/24
Next page
8
Hardware:
․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․․
2. Seat Post, Seat Cushion, Seat Sliding Tube, and Seat Sliding Tube Covers
Installation
Slide the Seat Post Cover (32) onto the tube of the Main Frame (48). Insert the Seat Post
(31) into the Seat Post Bushing (34) on the tube of the Main Frame (48) and then attach the
Seat Height Adjustment Knob (33) onto the tube of the Main Frame (48) by turning it in a
clockwise direction with Multi Hex Tool provided to lock the Seat Post (31) in the suitable
position.
Remove three M8 Nylon Nuts (25) and three Ø16xØ8x1.5t Washers (26) from underside of
the Seat Cushion (23). Remove nylon nuts and washers with the Multi Hex Tool with
Phillips Screwdriver provided. Guide bolts on underside of the Seat Cushion (23) through
holes on top of the Seat Sliding Tube (76), attach with three removed M8 Nylon Nuts (25)
and Ø16xØ8x1.5t Washers (26). Tighten nylon nuts and washers with the Multi Hex Tool
with Phillips Screwdriver provided. Remove the Ø8xØ20x2.0t Big Washer (29) and Seat
Adjustment Knob (30) from the Seat Sliding Tube Bolt (28). Guide the Seat Sliding Tube
Bolt (28) on underside of the Seat Sliding Tube (76) through hole on top of the Seat Post
(31), attach with the Ø8xØ20x2.0t Big Washer (29) and Seat Adjustment Knob (30) that
were removed.
Attach the Left and Right Seat Sliding Tube Covers (22L, 22R) onto the Seat Sliding Tube
(76) and Seat Post (31) with five ST2.9x16mm Screws (27) and two ST4.2x20mm Screws
(7). Tighten screws with the Multi Hex Tool with Phillips Screwdriver provided.
4 Big Curve Washers
(Ø8xØ20x2.0t)
2 Cap Nuts (M8) 2 Bolts (M8x90mm)2 Carriage Bolts
(M8x90mm)
Multi Hex Tool with Phillips Screwdriver
S10, S13, S14, S15
Tool:
32
31
33
30
29
27
7
27
7
26
25
22L
22R
23
48
76
28
34
Multi Hex Tool
S10, S13, S17, S19
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Transport Pro Magnetic Upright Bike 20690 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Transport Pro Magnetic Upright Bike 20690 in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info