552432

LifeGear Advanced - Magnetic Upright Bike 20390 Manual

13
Zoom out
Zoom in
Previous page
1/17
Next page
12
Tool:
4. Handlebar, Computer, and Foot Pedal Installation
Remove two M8x15 Bolts (22) and Ø16xØ8 Curve Washers (27) from the Handlebar Post
(8). Insert the Hand Pulse Sensor Wires (2) into the hole on the Handlebar Post (8) and
then pull them out from the top end of the Handlebar Post (8). Attach the Handlebar (5)
onto the Handlebar Post (8) with two M8x15 Bolts (22) and Ø16xØ8 Curve Washers (27)
that were removed. Remove four M5x10 Bolts (6) from the Computer (7). Connect the
Hand Pulse Sensor Wires (2) and Middle Section Sensor Wire (17) to the wires that come
from the Computer (7). Tuck wires into the Handlebar Post (8). Attach the Computer (7)
onto the top end of the Handlebar Post (8) with four M5x10 Bolts (6) that were removed.
The Cranks, Foot Pedals, Pedal Shafts and Pedal Straps are marked “R” for Right and
“L” for Left.
Insert the pedal shaft of Left Foot Pedal (21) into threaded hole in the left Crank (38).
Turn the pedal shaft by hand in the counter-clockwise direction until snug.
Note: DO NOT turn the pedal shaft in the clockwise direction, doing so will strip the
threads.
Tighten the pedal shaft of Left Foot Pedal (21) with the Multi Hex Tool with Phillips
Screwdriver provided.
Insert pedal shaft of Right Foot Pedal (40) into threaded hole in right Crank (38).
Turn the pedal shaft by hand in the clockwise direction until snug.
Tighten pedal shaft of Right Foot Pedal (40) with the Multi Hex Tool with Phillips Screwdriver
provided.
Multi Hex Tool with Phillips
Screwdriver S13, S14, S15
Allen Wrench 6mm
40
38
21
38
8
27
22
7
17
2
2
6
5
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Advanced - Magnetic Upright Bike 20390 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Advanced - Magnetic Upright Bike 20390 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info