552432
12
Zoom out
Zoom in
Previous page
1/17
Next page
11
Tool:
3. Handlebar Post and Tension Control Knob Installation
Remove one M8x15 Bolt (22), Ø20xØ8 Curve Washer (30), four M8x10 Bolts (15) and
Ø16xØ8x1.5 Washers (16) from the Main Frame (41).
Slide the Handlebar Post Cover (19) up to the Handlebar Post (8).
Insert the Tension Cable (10) through into the bottom hole of Handlebar Post (8) and pull it
out from the square hole of Handlebar Post (8).
Connect the Sensor Wire (31) from the Main Frame (41) to the Middle Section Sensor Wire
(17) from the Handlebar Post (8).
Insert the Handlebar Post (8) onto the tube of the Main Frame (41) and secure with one
M8x15 Bolt (22), Ø20xØ8 Curve Washer (30), four M8x10 Bolts (15) and Ø16xØ8x1.5
Washers (16) that were removed. Slide the Handlebar Post Cover (19) down to the Main
Frame (41).
Remove the Ø5 Big Washer (29) and M5x25 Bolt (67) from the Tension Control Knob (9).
Put the cable end of resistance cable of Tension Control Knob (9) into the spring hook of
Tension Cable (10) as shown in drawing A of figure 3. Pull the resistance cable of Tension
Control Knob (9) up and force it into the gap of metal bracket of Tension Cable (10) as shown
in drawing B of figure 3. Attach the Tension Control Knob (10) onto the Handlebar Post (8)
with the Ø5 Big Washer (29) and M5x25 Bolt (67) that were removed.
Multi Hex Tool with Phillips
Screwdriver S13, S14, S15
Allen Wrench 6mm
41
31
19
15
17
10
10
9
17
8
22
30
15
16
29
67
BA
9
10
10
9
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for LifeGear Advanced - Magnetic Upright Bike 20390 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of LifeGear Advanced - Magnetic Upright Bike 20390 in the language / languages: English as an attachment in your email.

The manual is 0,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info