765518
38
Zoom out
Zoom in
Previous page
1/80
Next page
36
Skating / Bouncing
When the chainsaw fails to dig in during a cut, the guide
bar can begin hopping or dangerously skidding along
the surface of the log or branch, possibly resulting in
the loss of control of the chainsaw. To prevent or reduce
skating or bouncing, always use the saw with both hands
make sure the saw chain establishes a groove for cutting.
Never cut small, fl exible branches or brushes with your
chainsaw. Their size and fl exibility can easily cause the
saw to bounce towards you or bind up with enough force
to cause a kickback. The best tool for that kind of work is a
hand saw, pruning shears, an axe or other hand tools.
Personal protective equipment
Wear a helmet at all times when operating the machine.
A helmet, equipped with mesh visor, can help reduce the
risk of injury to the face and the head if kickback occurs.
Wear ear protectors. Exposure to noise can cause hearing
loss.
Good quality personal protective equipment, as used
by professionals, will help reduce the risk of injury to
the operator. The following items should be used when
operating the machine:
Safety helmet
should comply with EN 397 and be CE marked
Hearing protection
should comply with EN 352-1 and be CE marked
Eye and face protection
should be CE marked and comply with EN 166 (for safety
glasses) or EN 1731 (for mesh visors)
Gloves
should comply with EN381-7 and be CE marked
Leg protection (chaps)
should comply with EN 381-5, be CE marked and provide
allround protection
Chain saw safety boots
should comply with EN ISO 20345:2004 and be marked
with a shield depicting a chain saw to show compliance
with EN 381-3. (Occasional users may use steel toe-cap
safety boots with protective gaiters which conform to
EN 381-9 if the ground is even and there is little risk of
tripping or catching on undergrowth)
Chain saw jackets for upper body
protection
should comply with EN 381-11 and be CE marked
Know your Chain saw
1
Trigger Release
2
On/off Button
3
Chain Drive
4
Bar Groove
5
Rear Handle
6
Battery
7
Front handle
8
Front Hand Guard /
Chain brake lever
9
Chain Lubricant Cap
10
Guide Bar
11
Saw Chain
12
Guide Bar Cover
13
Chain tensioner wheel
14
Chain Catcher
5
7 869
11 12
10
13
2
1 3
4
14
WARNING
Consequences of improper maintenance, removal
or modifi cation of safety features like the chain
brake, ignition switch, hand guard (front and back),
spiked bumper, chain catcher, guide bar, low kick-
back saw chain may cause the safety features to not
function correctly, thus increasing the potential for
serious injury.
EN
ENGLISH
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Levita CS35 2x20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Levita CS35 2x20V in the language / languages: English, German as an attachment in your email.

The manual is 10,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info