Manual Levita CS35 2x20V (page 36 of 80) (English, German)

765518

Zoom out

Zoom in

1/80

ENGLISH

repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cung tools sharp and clean. Properly

maintained cung tools with sharp cung edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits etc.

in accordance with these instrucons, taking into

account the working condions and the work to

be performed. Use of the power tool for operaons

dierent from those intended could result in a

hazardous situaon.

5) Baery tool use and care

a) Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one

type of baery pack may create a risk of re when

used with another baery pack.

b) Use power tools only with specically designated

baery packs. Use of any other baery packs may

create a risk of injury and re.

c) When baery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys,

nails, screws or other small metal objects, that can

make a connecon from one terminal to another.

Shorng the baery terminals together may cause

burns or a re.

d) Under abusive condions, liquid may be ejected

from the baery; avoid contact. If contact

accidentally occurs, ush with water. If liquid

contacts eyes, addionally seek medical help.

Liquid ejected from the baery may cause irritaon

or burns.

6) Service

a) Have your power tool serviced by a qualied repair

person using only idencal replacement parts.

This will ensure that the safety of the power tool is

maintained.

Chain saw safety warnings

• Keep all parts of the body away from the saw chain

when the chain saw is operating. Before you start the

chain saw, make sure the saw chain is not contacting

anything. A moment of inattention while operating

chain saws may cause entanglement of your clothing or

body with the saw chain.

• Hold the chain saw by insulated gripping surfaces

only, because the saw chain may contact hidden

wiring. Saw chains contacting a „live“ wire may make

exposed metal parts of the chain saw „live“ and could

give the operator an electric shock.

• Always hold the chain saw with your right hand

on the rear handle and your left hand on the front

handle. Holding the chain saw with a reversed hand

conﬁguration increases the risk of personal injury and

should never be done.

• Hold the chain saw by insulated gripping surfaces

only, because the saw chain may contact hidden

wiring. Saw chains contacting a „live“ wire may make

exposed metal parts of the chain saw „live“ and could

give the operator an electric shock.

• Wear protective glasses and ear protectors. Further,

wearing head, hand and leg protection equipment is

recommended. Adequate protective equipment will

reduce personal injury from ﬂying debris or accidental

contact with the saw chain.

• Do not work on trees with the chainsaw. There is a risk

of injury when working on a tree.

• Always keep proper footing and operate the chain saw

only when standing on ﬁxed, secure and level surface.

Slippery or unstable surfaces may cause a loss of balance

or control of the chain saw.

• When cutting a limb that is under tension, be alert

for spring back. When the tension in the wood ﬁbres is

released the spring loaded limb may strike the operator

and /or throw the chain saw out of control.

• Use extreme caution when cutting brush and sapli-

ngs. The slender material may catch the saw chain and

be whipped toward you or pull you oﬀ balance.

• Carry the chain saw by the front handle with the

chain saw switched oﬀ and away from your body.

When transporting or storing the chain saw, always

ﬁt the guide bar cover. Proper handling of the chain saw

will reduce the likelihood of accidental contact with the

moving saw chain.

• Follow instructions for lubricating, chain tensioning and

changing accessories. Improperly tensioned or lubrica-

ted chain may either break or increase the chance for

kickback.

• Keep handles dry, clean, and free from oil and grease.

Greasy, oily handles are slippery causing loss of control.

• Cut wood only. Do not use chain saw for purposes

not intended. For example: do not use chain saw for

cutting metal, plastic, masonry or non-wood building

materials. Use of the chain saw for operations diﬀerent

than intended could result in a hazardous situation.

Causes and operator prevention of

kickback:

Kickback may occur when the nose or tip of the guide

bar touches an object, or when the wood closes in and

pinches the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse

reaction, kicking the guide bar up and back towards the

operator.

Pinching the saw chain along the top of the guide

bar may push the guide bar rapidly back towards the

operator.

Either of these reactions may cause you to lose control of

the saw which could result in serious personal injury.

Do not rely solely on the safety devices with which the

chain saw is equipped.As a chain saw user, you should

take several steps to keep your cutting jobs free from

accident or injury.

Kickback is the result of tool misuse and/or incorrect

operating procedures or conditions and can be avoided

by taking proper precautions as given below:

• Maintain a ﬁrm grip, with thumbs and ﬁngers encircling

the chain saw handles, with both hands on the saw

and position your body and arm to allow you to resist

kickback forces. Kickback forces can be controlled by

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Levita CS35 2x20V in the language / languages: English, German as an attachment in your email.

The manual is 10,11 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Levita CS35 2x20V Manual

Product: