765518
34
Zoom out
Zoom in
Previous page
1/80
Next page
32
EN
ENGLISH
English
TECHNICAL DATA
Cordless-Chain saw CS35 2x20V
No-load chain speed 8,5 m/s
Usable cutting length 355 mm/14
Chain oil tank capacity 150 ml
Battery voltage 40 V (2x20 V) / 2,0 Ah
Weight with battery 4,7 kg
Vibration details
Vibration total values (triaxial vector sum) determined according to EN 60745-2-13,
Uncertainty K = 1,5 m/s2
Vibration emission value ah Front handle
Vibration emission value ah Rear Handle
2,57 m/s2
4,92 m/s2
Noise information
Measured according to1) EN 60745
;
2) 2000/14/ EG+2005/88/EC
Sound pressure level LpA
1) Unsicherheit K = 3 dB (A) 81,9 dB (A)
Measured sound power level LWA
2) Uncertainty K = 2,6 dB (A) 92,8 dB (A)
Guaranteed sound power level 96 dB (A)
Recommended battery types
Typ LI 22 / BT20 20V
Recommended charger FC20 20V
Battery Charger FC20 20V Battery type
Typ LI 22 / BT20 20V
Input voltage 220 - 240 V Battery voltage 20 V
Frequency 50/60 Hz Battery capacity (Li-Ion) 2,0 Ah
Output voltage 20 V Battery power 40 Wh
Output current 2 x 2 A Recommended charger FC20 20V
Rated input 140 W
Recommended battery types
Typ LI 22 / BT20 20V
Technical changes reserved.
WARNING: The declared vibration total value(s) and the declared noise emission value(s) were measured according
to a standardized test method according to EN 60745 and can be used to compare one power tool with another. The
declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration emission may differ. This may significantly
increase the exposure level over the total working period. The vibration emission level will vary because of the ways in
which a power tool can be used and may increase above the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when
it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Levita CS35 2x20V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Levita CS35 2x20V in the language / languages: English, German as an attachment in your email.

The manual is 10,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info