792974

Lenco PDR-035 Manual

9
Zoom out
Zoom in
Previous page
1/66
Next page
9
Audio Setting
1. Press and hold the INFO/MENU button to access the menu control.
2. Rotate the ENTER knob (or press the or button) until the “Audio Setting” is selected and then press the ENTER knob.
3. Rotate the ENTER knob (or press the or button) until to select “Stereo Allowed” or “Forced Mono” and then press the
ENTER knob to confirm.
4. To quit the menu control, press the BACK button repeatedly.
BLUETOOTH AUDIO
Please follow the pairing instructions below to link the unit to your Bluetooth device.
1. Press the SOURCE button to enter the Bluetooth mode. The display will show “Disconnected”. It will start searching.
2. Turn on the Bluetooth function of your device and enable the search until “Lenco PDR-035” is found. Select “Lenco PDR-035” on
the Bluetooth device to make connection. Enter the pass code “0000” if required.
3. After successfully paired the display will show “Bluetooth Connected”.
4. You can now start playing music from your smartphone wirelessly to the speaker.
5. You can press the button to pause or resume the playback.
6. You can press the or button to skip to the previous or next song.
Note:
●
Press and hold the UNPAIR button will disconnect the connection and start to search another new Bluetooth device.
●
Due to ErP stage 2 requirement and protect the environment, the unit will turn off in standby mode automatically once no
music has been playing for around 15 minutes in Bluetooth mode. When the unit is power off due to ErP, press and hold the
STANDBY button to turn on the unit again.
“This product has a bluetooth reception function, you cannot transmit any bluetooth sound with it: this means that the Lenco PDR -
035 can only receive a bluetooth sound signal from an external source like a smartphone/tablet.”
AUX IN
This allows you to connect an external player’s sound through your unit.
1. You need to plug in a 3.5mm audio cable (not included) first into the unit’s AUX IN terminal.
2. Press the SOURCE button to enter the AUX IN mode.
3. Start your external player to play music.
4. The unit will output the sound.
Note:
●
Due to ErP stage 2 requirement and protect the environment, the unit will turn off in standby mode automatically when it is in
AUX mode for more than 4 hours. 10 minutes before entering the standby mode you will be notified with “AUTO POWER OFF”
on the display. To extend the AUX mode you can press the button. When the unit is power off due to ErP, press and hold
the STANDBY button to turn on the unit again.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco PDR-035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco PDR-035 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info