792974

Lenco PDR-035 Manual

8
Zoom out
Zoom in
Previous page
1/66
Next page
8
FM RADIO OPERATION
Station Scanning
1. Turn on the unit in FM mode.
2. Press the or button repeatedly to manually tune to a different frequency.
3. Or press and hold the or button to automatically search to the next available channel.
Storing FM Presets
You can save up to 20 FM presets.
1. Tune to the station you wish to store.
2. To save it to the preset channel 1 or 2 or 3, press and hold the prefered preset number. Then it will save to that preset channel.
3. To save it to other preset channel from 4 to 20, press and hold the numeric button “4”. A preset channel list will be displayed.
4. Rotate the ENTER knob (or press the or button) to select the desired preset channel to save.
5. Press the ENTER knob to save.
Recall Stored FM Presets
1. To recall the preset channel 1 or 2 or 3, press the numeric button respectively. Then it will tune to that preset channel.
2. To recall other preset channel from 4 to 20, press the numeric button “4”. The preset channel list will be displayed.
3. Rotate the ENTER knob (or press the or button) to select the desired preset channel to recall.
4. Press the ENTER knob to recall.
Stereo/Force Mono Selection
When receiving a Stereo FM radio channel, pressing the ENTER knob will switch between stereo audio and force mono audio.
Note:
- The telescopic antenna at the rear panel of the unit should be fully extended to ensure a good reception. Alter the antenna
position for the best reception.
Displaying FM Station Information
There are several types of information as listed below. To change the display information, press the INFO/MENU repeatedly.
1. Radio Text
Scrolling text which shows information on music titles or program details provided by the radio station
2. Program Type (PTY)
Type of program provided by the broadcaster
3. Frequency
Current channel frequency
4. Audio Type
Stereo or Mono
5. Battery Level
100 is maximum
6. Date
Displays the current date provided by the radio station
OTHER FM MENU OPERATIONS
Press and hold the INFO/MENU button to access the menu control. Then rotate the ENTER knob (or press the or button) for
different options as described below.
Scan Setting
1. Press and hold the INFO/MENU button to access the menu control.
2. Rotate the ENTER knob (or press the or button) until the “Scan Setting” is selected and then press the ENTER knob.
3. Rotate the ENTER knob (or press the or button) to select “Strong Stations Only” or “All Stations” and then press the
ENTER knob confirm. When the “Strong Stations Only” is selected, only the strong stations are detected. Scanning will ignore the
noisy stations. When “All Stations” is selected, all stations will be detected during FM scanning even if the radio station is noisy.
4. The next time doing the FM scan the unit will search for the stations based on this confirmed setting.
5. To quit the menu control, press the BACK button repeatedly.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco PDR-035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco PDR-035 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info