792974

Lenco PDR-035 Manual

7
Zoom out
Zoom in
Previous page
1/66
Next page
7
Displaying DAB + Station Information
There are several types of information as listed below. To change the display information, press the INFO/MENU repeatedly.
1. Radio Text scrolling
Shows music titles or program details provided by the selected radio station.
2. Signal Bar
Transmission signal level. The more the rectangles are filled, the stronger the signal is received. The unfilled rectangle is the
threshold level where the signal strength received should exceed this threshold. To improve the reception, adjust the antenna
position.
3. Program Type (PTY)
Type of program provided by the radio station
4. Multiplex Name
Displays name of multiplex to which the current station belongs
5. Frequency
Current channel number and frequency
6. Signal Error Rate
Shows the error rate. The larger this value, the more errors it receives. To improve the reception, adjust the antenna position.
7. Audio Bit Rate
This is the current channel audio Bitrate
8. Time
Displays the current time provided by the radio station
9. Date
Displays the current date provided by the radio station
OTHER DAB + MENU OPERATIONS
Press and hold the INFO/MENU button to access the menu control. Then rotate the ENTER knob (or press the or button) for
different options as described below.
Prune Invalid
This function removes inactive stations.
1. Press and hold the INFO/MENU button to access the menu control.
2. Rotate the ENTER knob (or press the or button) until the “Prune Invalid” is selected and then press the ENTER knob.
3. Rotate the ENTER knob (or press the or button) to select “Yes”.
4. Press the ENTER knob to confirm.
5. To quit the menu control, press the BACK button repeatedly.
Dynamic Range Control (DRC)
DRC can make quieter sounds easier to hear when the unit is used in a noisy environment. The DRC level of a broadcast is set by the
selected radio channel and transmitted with the service. Changing the DRC value on your unit enables you to apply a scaling factor to
this level.
There are three levels of compression:
DRC high:
Maximum compression as sent with the transmitted service
DRC low:
Set to 1/2 that of the sent transmitted service
DRC off:
No compression
1. Press and hold the INFO/MENU button to access the menu control.
2. Rotate the ENTER knob (or press the or button) until the “DRC” is selected and then press the ENTER knob.
3. Rotate the ENTER knob (or press the or button) to select “High”, “Low” or “Off”.
4. Press the ENTER knob to confirm.
5. To quit the menu control, press the BACK button repeatedly.
Note:
- Not all DAB + radio stations are able to use DRC function. If the station does not support DRC then the DRC setting will have no
effect.
- After you have adjusted the DRC level the sound may be louder.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco PDR-035 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco PDR-035 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info