477344

Lenco IPD-5100 Manual

7
Zoom out
Zoom in
Previous page
1/40
Next page
Clock Setting
When the unit is OFF (power off mode):
1. Press the MODE button and the clock digits blink.
2. Press the CH button to set hour.
3. Press the VOLUME +/- button to set minute.
4. Press the MODE button again entering 12/24 hour format setting mode.
5. Press the button to select 12 or 24 hour display format.
6. To save all settings and auto-exit the setting mode, wait for a few seconds.
Set Clock
Set 12/24 Hour format
Exit setting mode
/
VOLUME +/-
Listening to an External Audio Source
1. Connect an audio cable (not included) with 3.5mm stereo plug from
an auxiliary audio device to the AUX jack of the unit.
2. Press the POWER button to turn on the unit.
3. To select auxiliary audio input, press the FUNC button. The "AUX"
indicator show on display.
4. Turn on the external auxiliary audio device.
5. The volume and preset equalizer can now be controlled through the unit.
Operate all other functions on the external device as usual.
: Press the POWER button to turn off the unit when you finish listening.
Don't forget to switch off the power of the external audio device as well.
Notes
12
13
EngEng
Alarm Operation
When the unit is OFF (power off mode):
1. Press and hold the ALARM button until the alarm source indicator blink.
2. Press the VOLUME +/- button to select alarm source BUZ (buzzer) ,
RAD (radio) or iPod.
3. Press the ALARM button again, alarm time digits blink.
4. Press the CH / button to set alarm hour.
5. Press the VOLUME +/- button to set alarm minute.
6. To save all settings and auto-exit the setting mode, wait for a few seconds.
7. To activate the daily alarm, press the ALARM button and the
corresponding alarm source indicator appears on the LCD display.
:
---If "Wake to iPod" is selected but your iPod has not been docked, the alarm
source will be redirected to the Alarm Buzzer automatically when the alarm
is reached.
---When "Wake to Radio" is selected, make sure the radio station which you
want to wake to is tuned.
When the alarm time is reached, the buzzer alarm will sound for 3 Minutes.
It goes into Auto-snooze mode if no further button has been pressed.
The display shows the "SNOOZE" indicator. The buzzer turns off for the
snooze time (around 10 minutes) then comes on again. This operation will
be repeated three times. After the fourth alarm is finished, the alarm will
shut off until the same alarm time on the next day.
You may also activate the snooze function manually after the alarm sounds
by pressing the SNOOZE button. The buzzer stops for the snooze time then
comes again.
To cancel the snooze before it expires, press the ALARM button.
The snooze operation (including auto-snooze and manual snooze) can be
repeated by 3 times only.
To stop the alarm immediately after the buzzer sounds, you can also press
the ALARM button. It resets itself for the following day.
Select wake up alarm source
Setting the alarm time
Save settings and activate alarm
Wake to Buzzer
Notes
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lenco IPD-5100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lenco IPD-5100 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info