654230
8
Zoom out
Zoom in
Previous page
1/20
Next page
8
English
Technical data:
Power supply: 220-230V: 50Hz - 220-230V: 60Hz
Coffee heating element: 1200W
Steam heating element: 1200W
Coffee pump pressure: 12/15 bar
Pump on coffee boiler (ULKA): 48W -- Pump on steam boiler (ULKA): 21W
PID’s regulation: from 80°C up to 130°C
Water tank capacity: 2,7 litri
Coffee boiler capacity: 300 ml – Steam boiler capacity: 400 ml
Dimensions (HxLxP): 30*30*42 cm – Net Weight: 14,7 kg
To be operated with ground coffee
TROUBLESHOOTING:
We thank you for buying one of our products, projected and assembled in accordance with the most up-to date technological
innovations.
Following carefully the simple operations described in this manual, which respect to all essential safety regulations, you will
get the best performances and will appreciate the remarkable reliability of this product in the years to come.
Please find below the description of the most frequent problems and of their solution:
PROBLEM CAUSE SOLUTION
Coffee too cold
1. The machine had not reached the proper
temperature
2. Filter-holder not preheated
3. Cups not preheated
4. Thermostat malfunctions.
1. See section “Starting the Machine” and
“Making an Espresso”
2. Filter-holder must be heated together with the
water – see section “Starting the Machine”
3. Properly heat the cups on the cup-warmer
(18)
4. Contact the nearest SERVICE CENTER
Coffee comes out too
quickly
1. Too little coffee in the filter
2. Coffee not pressed enough
3. Coffee is old or unsuitable
1. Put more coffee in the filter
2. Press coffee more firmly
3. Use a different coffee blend
Coffee leaks between the
coffee group and the
filter-holder
1. Filter-holder not properly inserted
2. Too much coffee in the filter
3. Edge of the filter-holder not clean
4. The douche seal is worn out or damaged
1. Insert the filter-holder correctly
2. Put less coffee in the filter
3. Clean the edge of the filter-holder
4. Contact the nearest SERVICE CENTER
Coffee comes out in
drops
1. Too much coffee in the filter
2. Coffee too firmly pressed
1. Put less coffee in the filter
2. Press the coffee more gently
The machine does not
produce steam even if
the switches (6) and (9)
are on
1. Micro pump not functioning
2. Obstructed outlet hole at end of steam pipe
3. Too little water in tank
1. See section “Steam”
2. Clean the outlet hole with a needle
3. See section “Starting the Machine”
The machine does not
work and the ON light on
button (2) does not turn
on.
1. No electricity/power supply
2. The power cable is not properly plugged in.
3. The power cable is damaged
1. Check and restore the electrical power
2. Plug in the power cable correctly
3. Contact the nearest SERVICE CENTER for a
replacement cable
The inserted data and pictures can be subject to changes without previous notice for the improvement of the machine’s
performances.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lelit Diana PL60 PlusTR1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lelit Diana PL60 PlusTR1 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info