654230

Lelit Diana PL60 PlusTR1 Manual

6
Zoom out
Zoom in
Previous page
1/20
Next page
6
English
COMPONENTS :
1. Power cord
2. Main switch on/off
3. Steam ready pilot light
4. Coffee ready pilot light
5. Coffee switch
6. Steam group main switch
7. Double manometer
8. Cover for water tray
9. Steam switch
10. Steam tube with safety protection
11. Hot water tube
12. Filter holder (2 ways)
13. Support for filter holder connection
14. Removable tray/grill for espresso cup
15. Drip grill
16. PID - coffee boiler temperature controller
17. Water missing pilot light
18. Cup warming on top of the machine
19. Removable cover for water tank
20. Hot water switch
21. Hot water pilot light
22. Tamper
23. Coffee doser
24. \
25. Filter 1 cup
26. Filter 2 cups
27. \
28. Resin filter (inside water tank)
USER INSTRUCTIONS:
Starting the machine:
1. Remove the machine from its packing and make sure all packing parts have been taken off (including the protection
bags).
2. Lay the machine on a flat and steady surface far away from hot places and from the water taps.
3. Remove the water tank cover (19) on the top of the machine; extract the plastic tube that has a resin filter (28)
attached; extract the water tank.
4. Fill the tank with cold water.
5. Replace the water tank back in the machine; insert the plastic tube and pay attention not to bend it; replace the cover
(19) in its right position.
6. Insert the power cord (1) in the mains. Make sure that the wall socket is of the right voltage.
7. Place the filter holder (12) under the brewing group (13) and turn it from the left to the right. Leave it there so that it
can get warm and it gets ready for use.
8. Turn on the machine by pressing the main switch (2); the build-in pilot light confirms that the machine is on. The coffee
group and the steam boiler recharge go on automatically. Press the hot water toggle switch (20) up: once water will
flow out of the water tube (11) press the toggle switch (20) down.
9. Press the steam group main switch (6) in order to turn on the boilers’ heating element: the coffee ready pilot light (4)
and the steam ready pilot light (3) will go off confirming that the machine is ready for use.
10. The PID (16) will visualize the degrees inside the coffee boiler and will control the boiler’s heating.
11. The PID is already set from the producer on 95°C, i.e. the ideal temperature for a good cup of coffee. (If you want to
change the PID’s temperature, please follow the instructions written under How to set the temperature inside the boiler
by means of the PID).
Making an espresso with ground coffee:
12. Check that the tank contains water. ATTENTION: the internal tank has a special floating device that controls the water
level. In case of lack of water, the water missing pilot light (17) comes on automatically and at the same time the sound
alarm buzzes. Please fill the water tank with water (as described under Starting the machine, points 3-5): this will shut
off the pilot light (17) and the buzzer, confirming that the water level is suitable. NB: the water tank must be filled in
with water till the MAX level indicated on the appliance body.
13. Follow the instruction at point 9 in case the above written operations have not been yet done.
14. As soon as the PID’s (16) display shows the set temperature and the coffee ready pilot light (4) goes off, the machine is
ready for use.
15. Place the filter (25-26) in the filter holder (12). Lock the filter holder (12) in the brewing group (13) turning it from the
left to the right, after having poured the desired quantity of ground coffee (1 doser (23) corresponds to 1 coffee dose;
to get 2 coffee cups pour 2 dozers of ground coffee in the filter holder (12) ) and after having pressed it properly with
the pressing tool/tamper (22).
16. Place the espresso cup/s on the grill for espresso cups (14). NB: this machine has a removable tray (14) for espresso
cups and a drip grill (15) for cups/mug of max. 11cm height.
17. NB: The coffee switch (5) has 2 positions: up it’s on, down it’s off. Turn the coffee switch on (5) to start brewing
and once you have reached the desired quantity of coffee press the toggle switch (5) down to stop dispensing the
coffee.
18. Remove the filter holder (12) from its support (13) and throw away the coffee grounds. NB: Place the filter holder (12)
empty (without coffee) back in its support (13) in order to maintain the entire coffee group at the suitable temperature.
Steam:
19. Check that the tank contains water. ATTENTION: the internal tank has a special floating device that controls the water
level. In case of lack of water, the water missing pilot light (17) comes on automatically and at the same time the sound
allarm buzzes. Please fill the water tank with water (as described under Starting the machine, points 3-5): this will shut
off the pilot light (17) and the buzzer, confirming that the water level is suitable. NB: the water tank must be filled in
with water till the MAX level indicated on the appliance body.
20. Switch on the steam group by pressing the steam main switch (6) (only if it has not been yet done): the pilot light (3)
gets off. The machine is at the right temperature, ready to make steam.
21. Place the cup/mug with the drink to be heated under the steam tube (10).
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lelit Diana PL60 PlusTR1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lelit Diana PL60 PlusTR1 in the language / languages: English, German, Italian as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info