534693
63
Zoom out
Zoom in
Previous page
1/104
Next page
Manual Leapfrog Creatr
63 Leapfrog BV
Heat cartridge
Check whether the heat cartridge is sufficiently centred in the heat block. In the pictures below
you can see a heat cartridge that is centred and one that is not.
It is important that the heat cartridge is centred properly so that the heat is distributed equally
over the filament and that the thermistor reads the correct temperatures, preventing too cold
extrusion which can cause clogging.
If you see that the heat cartridge is too far outside the block, please loosen the index bolt that
holds it and adjust the position.
Correct: Centred Wrong: Not centred
Nozzles
Check if the nozzles are still hot after the extruder stops and if they have the correct
temperature. Do not check this with your bare hands, the nozzles can be very hot! Please look at
the software for the current temperature. If the nozzle heating is somehow turned off or a
different temperature was set, this will result in clogging due to cold extrusion. It is important to
check if the software is set at the correct temperature.
Driver gear
Check if the driver gear is tightened to its motor correctly. If the driver gear is not tightened
correctly, the motor will deliver power If this is the case, please
tighten the screw that is indicated on the picture below.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Leapfrog Creatr at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Leapfrog Creatr in the language / languages: English as an attachment in your email.

The manual is 8,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info