495496

Lavorwash Silversteam Manual

22
Zoom out
Zoom in
Previous page
1/40
Next page
22
59
Caution!
• Make sure that the safety pin (14) is connected firmly, by drawing it a little.
Remove the steam hose
Disconnect the heating switch (5).
Keep the steam nozzle (16) in a wash-basin
Push the steam button (15) on the handle until the remaining steam has completely
come out of the boiler.
Disconnect the main switch (4).
Move the electrical plug (7) from the supply socket.
Lift the safety cap (21).
Remove the quick coupler plug (12).
Put a protection cloth
Warning:
• Cotton cloths are used to protect surfaces from
scratches.
• Be careful ! Cloths become hot while you do the cleaning.
• Change the cloth only after unplugging the steam cleaner!
• Dirty cloths can be washed in the washing-machine.
Put a protection cloth on a plane surface.
Lay the scrubbing brush (19) in the middle of the
cloth.
Push the cloth holding spring clamps (20) and
keep them pressed.
Put two corners of the cloth under the spring clamps
(20) from behind.
Now put the front half of the cloth under the spring
clamps (20) and release them.
Put the cotton cap (optional) on the triangular brush.
This cotton cap is properly designed to fit the triangular brush (optional).
20
19
Fit the small brush
Warning:
• The small brush must be used only together with the
bent nozzle.
Fit the small brush into the bent nozzle.
Fit the bent nozzle into the pipe (17) or into the
steam nozzle handle (16).
OPCIÓN: plancha (aplicable sólo a los modelos equipados
con tubo de vapor con toma de acoplamiento)
Nota bien:
es posible equipar la máquina con distintos tipos
de plancha, según el equipamiento o las
características técnicas.
Limpieza de los vidrios (opción)
¡Atención!
•A temperaturas extremas, alrededor del grado de congelación, es posible rociar el vidrio de
la ventana con el vapor por muy poco tiempo y desde una distancia de por lo menos 20 cm.
• Seguidamente rociar el vapor sobre la entera superficie del vidrio para compensar las
diferencias de temperatura y para evitar tensiones sobre la superficie del vidrio.
•Grandes diferencias de temperatura entre el vidrio de la ventana y el vapor pueden causar
la rotura del vidrio.
Montar el accesorio para lavar vidrios
Apretar el botón de resorte (18) presente en el mango de la tobera del vapor (16) o en
el tubo de alargo (17).
Introducir el lavavidrios en el tubo (17) o en el mango de la tobera del vapor (16) hasta
que se dispare el botón de resorte (18).
Advertencia:
•Para limpiar las ventanas particularmente sucias es preciso pasar primero con el cepillo
pequeño o grande y con el paño.
• Seguidamente se debe limpiar la ventana con el lavavidrios.
• Después de cada operación de limpieza, limpiar la faja de goma del lavavidrios con un paño
limpio. Sólo una faja bien limpia y bien destensada permite lavar la ventana sin dejar rayas.
Rociar el vapor sobre la ventana de arriba a abajo.
Eliminar la suciedad con la esponja en goma, aplicando una leve presión.
Secar apoyando la faja de goma del lavavidrios sobre la parte de la ventana que se desea.
N°......pieza............................................................
1/A ....base.............................................................
2/A ....interruptor vapor (botón de presión)............
3/A ....piloto temperatura (naranja)........................
4/A ....regulador temperatura.................................
5/A ....tubo vapor con toma de acoplamiento
(tubo flexible) ...............................................
Función
Protección aislada para apoyar la plancha.
Salida del vapor durante el planchado.
Indica cuando la plancha está lista para planchar.
Regulación de la temperatura deseada para planchar.
Conexión con la limpiadora a vapor.
A
1 2 3 4 5
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lavorwash Silversteam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lavorwash Silversteam in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info