495496

Lavorwash Silversteam Manual

21
Zoom out
Zoom in
Previous page
1/40
Next page
2160
Connect or remove the steam hose
is provided with it).
(only if the steam cleaner)
Caution!
• The steam hose and the power cord must be in very
good conditions.
• The steam cleaner must be unplugged.
•Work only with dry hands
Connect the steam hose
Lift the safety cap (21).
Snap the quick coupler plug (12) till the safety pin
(14)(upwards pointed) fits in the corresponding
cap hole (21).
Release the safety cap (21).
22
12
2114
Fit or remove accessories
Caution!
•Never work with wet hands
• The steam cleaner must be disconnected
• Accessories get hot when the machine is working. Be careful when replacing
the accessory during operation.
Fit the extension pipe
Push the spring button (18) on the steam nozzle handle (16)
Fit the steam nozzle handle (16) into the sleeve of the extension pipe (17) until the
spring button (18) snaps.
Fit the brushes
•In order to be able to use the rectangular or the triangular (optional)
scrubbing brush, it is necessary to connect the brush-joint (23) first:
Keep the brush-joint downwards pointed and insert
it completely into the brush. Turn then the brush-
joint upwards pointed.
Push the spring button (18) on the steam nozzle
handle (16) or on the extension pipe (17).
Fit the brush-joint (23) into the steam nozzle handle
(16) or into the extension pipe (17), until the spring
button (18) snaps.
Push the spring button (18) on the steam nozzle
handle (16) or on the extension pipe (17).
Remove the extension pipe (17) or the brush-joint
(23) from the steam nozzle handle (16).
Keep the brush-joint downwards pointed and
remove the brush from the brush-joint
Planchar con la plancha
¡Atención!
• Atenerse a las instrucciones para planchar la lencería o las prendas de vestir.
Dirigir el primer chorro de vapor hacia un paño.
Durante el planchado apretar el botón del vapor sólo a distancia adecuada.
Dejar resbalar ligeramente la plancha sobre la prenda. No es necesario aplicar una
presión excesiva.
Planchar siempre sobre una superficie permeable al vapor y resistente al calor.
Planchar sólo prendas secas.
Seleccionar la temperatura para planchar según el tipo de tejido de la prenda. Atenerse
a las instrucciones indicadas en las etiquetas.
Planchar siempre las prendas completamente secas para evitar que se formen pliegues.
Planchar al revés las prendas delicadas.
Tabla: planchar con vapor
Refrescado de las prendas
Ajustar la temperatura deseada maniobrando el regulador de la temperatura (4/A) de la plancha.
Ajustar el regulador de intensidad del vapor de la plancha (opción) sobre 3-4.
Rociar el vapor sobre la prenda colgada, desde una distancia de unos 20 cm.
Para los tejidos delicados se aconseja poner un paño limpio de algodón encima de la
prenda y seguidamente rociar el vapor.
Accesorio especial: plancha (opción)
¡Atención!
• No trabajar con las manos mojadas.
• Desconectar siempre la clavija de la toma de corriente antes de conectar la plancha.
•
El tubo del vapor no debe entrar en contacto con la plancha caliente ni con objetos que tengan cantos vivos.
• Apoyar la plancha sólo en la base correspondiente.
• No dejar la plancha conectada a la máquina sin custodia.
Conexión de la plancha
Verter el agua en la caldera (ver capítulo “Llenar con agua”).
Levantar la tapa de seguridad (21).
Int
roducir la clavija de la plancha en la toma, con el perno de seguridad (14)
dirigido hacia arriba (ver capítulo “Conectar o desconectar el tubo del vapor”).
Soltar la tapa de seguridad (21).
Encender la máquina (interruptor general 4 e interruptor para el
calentamiento 5).
Regular la temperatura deseada maniobrando el regulador de
temperatura de la plancha.
Regular la intensidad del vapor maniobrando el regulador del vapor
(9) (opción).
Tan pronto se enciende el piloto verde (3), la máquina está lista para trabajar.
Tipo de tejido
Lino/Algodón
Algodón ligero
Lana/Seda
Materiales sintéticos
Intensidad del vapor
(opción)
3-4
3
1
1
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lavorwash Silversteam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lavorwash Silversteam in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info