495496
20
Zoom out
Zoom in
Previous page
1/40
Next page
20
61
Connect the steam cleaner
Caution!
Connect the machine only if the mains voltage corresponds to the rated
voltage reported on the rating plate.
The main switch (4) and the heating switch (5) must be disconnected.
The power cord (7) must not be damaged.
The water tank must be filled with a sufficient water quantity (min. 0.5 l)
The hose must be connected to the relevant accessory.
The steam nozzle must not be obstructed.
Push the main switch (4); an orange light will appear (4/B).
Push the heating switch (5); a green light will appear (5/B).
The machine is in operation.
Water is heated and steam is generated.
When the green lamp lights up (3) the machine is ready to work.
Pour water into the boiler
Caution!
When the machine is working, don't open the boiler cap (2)!
The boiler cap may be supplied with an optional security. This security prevents the cap
unscrewing in case the boiler still contains steam
Warning
When the boiler water is finished, the orange water indicator lamp will light up (6).
Filling
Disconnect the heating switch (5).
Keep the steam nozzle in the wash-basin.
Push the steam button (15) on the handle and keep it pressed until all steam has come
out.
Disconnect the main switch (4).
Move the electrical plug (7) from the supply socket.
Let the steam cleaner cool down.
Press the boiler cap (2) downwards and turn it anticlockwise at the same time, so as
to unscrew it completely.
Pour water into the boiler.
Put the cap on the boiler: press it downwards and turn it clockwise at the same time,
so as to screw it tight.
Disconnect the steam cleaner
Disconnect the heating switch (5) and the main switch (4).
Turn the steam intensity regulator (9) (optional) on position 0.
Pull out the electrical plug (7) from the supply socket.
Let the steam cleaner cool down.
Mantenimiento
¡Atención!
Antes de efectuar cualquier operación de mantenimiento o de limpieza es preciso desconectar
la clavija de la toma de corriente.
No vaciar la caldera hasta cuando quede agua caliente dentro de ella.
•Para evitar la acumulación de formaciones calcáreas se recomienda llenar, por lo menos una
vez al mes, la caldera con agua, enjuagarla y vaciarla (es posible vaciar la máquina colocándola
en posición vertical).
En previsión de largos periodos de inactividad se aconseja vaciar el agua de la caldera.
Dejar siempre que la máquina o la plancha se enfríen antes de guardarlas.
Guardar la limpiadora a vapor
Es posible guardar la máquina en posición vertical y
utilizar el enrollador del cable (opción).
Extraer en enrollacable girándolo hacia abajo.
Introducir los tubos en las sedes correspondientes
y enrollar el cable sobre las aletas externas.
También es posible enrollar el cable eléctrico sin
haber introducido los tubos.
Limpieza
Limpiar el chasis con un paño húmedo.
No utilizar disolventes ya que podrían perjudicar las
partes en plástico de la máquina.
De vez en cuando limpiar la placa de la plancha utilizando
un producto para metales. Seguidamente pasar un paño
seco.
Limpiar los accesorios sólo con agua.
Dejar secar los cepillos y seguidamente limpiarlos con las cerdas dirigidas hacia arriba a fin
de evitar eventuales deformaciones.
Trabajar con la limpiadora a vapor
Advertencia:
Al comienzo de las labores de limpieza o de planchado o después de una larga pausa, se
aconseja rociar un poco de vapor sobre un paño a fin de eliminar eventuales residuos de
agua presentes en el tubo del vapor.
•Para la acción limpiadora es determinante la intensidad del vapor y no la presión aplicada
sobre el accesorio.
Ajustar la intensidad del vapor maniobrando el regulador del vapor (9) (opción).
Apretar el botón de activación del vapor (15) situado en el mango de la tobera del vapor.
Dirigir el chorro de vapor hacia la superficie a limpiar.
Pasar la fregadera de manera uniforme sobre la superficie a limpiar.
Para la suciedad más difícil frotar un poco sin presionar la fregadera.
Con un paño recoger la suciedad disuelta.
Tabla:
intensidad aconsejada del vapor
(modelo con regulación del vapor)
Grado de suciedad
Poco sucio
Suciedad leve
Suciedad obstinada
Intensidad del vapor
1-2
3-4
5
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lavorwash Silversteam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lavorwash Silversteam in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info