Manual Laurastar Smart (page 5 of 10) (English, German, Dutch, French, Italian, Polish, Portuguese, Spanish)

778224

Zoom out

Zoom in

1/10

- 8 -- 7 -

Preparing the appliance

We recommend that you rinse out the steam generator (15) before using it

for the ﬁrst time:

• Check that the plug (23) is disconnected from the mains socket.

• Set the ironing board (1) to its highest position, then remove the water

reservoir (11).

• Place the drain tray (14) beneath the drain cap (22).

• First unscrew the steam generator cap (21), then unscrew the drain cap

(22). D

• Remove the small and the large lid (12) from the water reservoir. Remove

the ﬁlter compartment with the ﬁlter (13). E

• Fill the water reservoir with warm tap water up to the MAX level. F

• Position the large funnel shaped lid (12) at the place of the water reservoir (11)

on top of the steam generator (15) and place the water reservoir above it. G

• Once all the water has ﬂown through and the reservoir is empty, screw the

two caps in place again.

• Dispose of the water.

Which water should be used?

Your Laurastar has been designed for use with tap water. It is still absolutely

necessary to use the supplied anti-scale ﬁlter (13) in order to beneﬁt fully

and longer from your Laurastar.

NOTICE: Never use additives (e.g.

perfumed water), water containing

chemical products or water from tumble

dryers as these products will have a

detrimental effect on the function of your

Laurastar.

Storing your system

• To turn your appliance off, press the main ON/OFF button (16).

• Remove the power plug (23) and roll the electric cable around the feet of

the table. If your model has the automatic rewind, pull on the cable in order

to activate the rewind.

• Place the steam hose holder (8) horizontally in the hole designed for this

purpose.

• Place the iron in the iron safety storage box (5). Fold the iron-rest into the

“close” position on top of the table. Hold the table with one hand on the

iron rest side (6). With the other hand grasp the ironing board (1), tilt the

table into the vertical position. H I

• Store your system in a vertical position. You can leave the water in the

reservoir until the next usage.

• NOTE: if you store your system in a horizontal position, you must

empty the water reservoir (11).

A B

Installation and storage

Installing your ironing system

• Remove the appliance from the box and position it vertically on the ground

in a closed position.

• Hold the table with one hand on the iron rest side (6). Hold the middle

of the table (1) with the other hand and pivot it to a horizontal position

(maximum height). A B

• Unfold the iron-rest to the open position. C

• Fit the ironing board cover (4), securing it from the side of the iron rest

to the tip of the ironing board, then adjust. The cover supplied with this

product is specially designed to ensure uniform distribution of air over the

whole board in vacuum or blower mode. Use only a Laurastar approved

cover to ensure that its effectiveness is not impaired. The cover is was-

hable at 30°C (warm water); do not spin dry.

• Take the iron (2) out of its safety storage box (5) and place it on the iron-

rest (6).

• You can fold the iron-rest into the close position (6a) if you desire.

• Insert the steam hose holder (8) in one of the two holes beside the iron-

rest (6), ﬁx the steam hose on the steam hose holder (3a). Insert the

protective soleplate hook (28) in the other hole.

• You can lower the table height by clamping the handles (7). There are six

levels. To lift the table, simply pull it up without using the handles.

• To move your Laurastar, simply raise the tip of the board and roll.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laurastar Smart in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Laurastar Smart

Laurastar Smart Quick start guide - English, German, Dutch, French, Italian - 75 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laurastar Smart Manual

Product: