778224
6
Zoom out
Zoom in
Previous page
1/10
Next page
- 10 -
3-6 min.
- 9 -
EN
NOTE: Before ironing, or after an extended break, press the iron’s
steam button (9) 2 or 3 times, while pointing it away from the clothes.
This will release any condensation from the iron and prevent water
marks on the clothes.
CAUTION : Do not point the iron at people or pets while using
vertical steam.
Ironing
Two ironing modes
For the best possible steam ironing result, we offer two modes of ironing :
Blower mode : A Pressing the vacuum/blower button (10) on the iron
activates the fan (24) in blower mode. this blows air into the fabric from
below, helping to reduce unwanted creases.
Vacuum mode : B Pressing the vacuum/blower button (10) again,
activates the fan (24) in vacuum mode. This draws in air, holding the
garment in place on the board to facilitate perfect pleats.
Press the vacuum/blower button (10) to switch from blower to vacuum mode
and vice versa. You can adjust the intensity (4 speeds) pressing the fan speed
button (19) on the user interface of the steam generator.
LAURASTAR SENSTEAM (17) (certain models only)
Laurastar SenSteam (17) allows you to obtain an automatic steam diffusion
without pressing the steam button (9). The steam is automatically activated
when the iron moves forward and stops when the iron rests or moves back
C.
To switch back to regular mode, press the Laurastar SenSteam button (17)
again.
PULSE (18) (certain models only)
Press the pulsed steam button (18) to activate the pulse function. Then press
the steam button (9) to automatically generate small and regular steam jets
D. To switch back to regular mode, press the pulsed steam button again (18).
Steam principle
Perfect ironing requires diffusion of steam across the fabric, in order to relax
the fibres, and drying to fix them in place. Creases can only be completely
removed if these conditions are present.
Advice: For best results, first iron the item with steam and then iron it again
without steam, thereby enabling the iron to dry the fabric.
Protective soleplate (27)
The protective soleplate is indispensable for dark-coloured fabrics which can
A
B
C
D
Start up
CAUTION: Always fill the water reservoir (11) completely
before turning on your Laurastar. Operating the appliance
without water could damage the appliance.
PLEASE NOTE: Operating the appliance without water will void any
limited warranties provided with your appliance.
Installation of the anti-scale cartridge and filling
Check that the power plug is disconnected from the mains socket.
Set the ironing board to its highest position.
Take the water reservoir (11) out. Take off the water reservoir lids.
Install the anti-scale filter (13). A
Fill the reservoir with tap water. The filtered water has to reach the
MAX level. B
Close the water reservoir with the lids and put the reservoir back on the
steam generator (15).
If the water does not flow, soak the anti-scale filter in cold water for 3
minutes.
User interface
ON/OFF = the green indicator light flashes until the appliance is ready to
be used.
= Option Laurastar SenSteam. If your appliance is equipped with the
Laurastar SenSteam option (17), the white indicator light signals that the
function is on.
= Option Pulsed Steam. If your appliance is equipped with the Pulsed
Steam option (18), the white indicator light signals that the function is ON.
Fan speed button (19) = choice of four speeds. The white indicator light
signals the intensity chosen.
Empty water light (20) = the red drop shaped indicator light signals that
there is no more water in the reservoir (11).
Switching on your appliance
Insert the power plug (23) in the socket. If your model is equipped with the
automatic rewinder, first pull the electric cable untill the end-of-cable mark
is visible at the rewinder opening.
Press the main ON/OFF button (16), the green indicator light will flash for
3-6 minutes. C
When the green indicator light stops flashing and stays on, the appliance is
ready. You can start ironing.
NOTE: For your comfort and safety, your Laurastar system will
switch off after 10 minutes of non-use.
ON/OFF
SenSteam
Pulse
Fan speed
Water
B
C
A
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laurastar Smart at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laurastar Smart in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1.76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Laurastar Smart

Laurastar Smart Quick start guide - English, German, Dutch, French, Italian - 75 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info