646823
9
Zoom out
Zoom in
Previous page
1/92
Next page
TwinFinder
09
Conductors routed deeper than 40Ɓmm may remain
undetectable. Always switch off power when working in
the vicinity of electric conductors.
!
Because of its high sensitivity, the device can normally detect
objects in a broad radius beneath the relevant surface. If you want
to determine the actual centre of the hidden object, you must
move the device from both left and right towards the object. The
electric conductor is located at the mid-point between the two
marks. Refer also to Tip 1 about this.
Tip 7: Depending on surface material electro-static interference may
occur when moving unit, LED’s will light up. In this case move tool
slowly over the wall without touching surface.
Tip 8: Because of static charges, electric fields may be detected
at the side of the actual position of the wire. To carry away these
charges, lay your free hand on the wall.
Tip 9: If you suspect that wires must be present but cannot find any,
this may be because they are shielded in conduits. Use METAL-Scan
in order to check the near area.
Tip 10: The position where you start is important: To achieve maxi-
mum sensitivity, start by placing the device in a position which is
known not to be near live wires.
6
EU directives and disposal
This device complies with all necessary standards for the
free movement of goods within the EU.
This product is an electric device and must be colle-
cted separately for disposal according to the European
Directive on waste electrical and electronic equipment.
5 cm / 7.5 cm /
4 cm
110 – 230V, 50 – 60 Hz
0°C...40°C (32°F...104°F)
-20°C ... 70°C (-4°F…158°F)
1 x 9ƁV alkaline battery
(type 6LR 61)
78 x 165 x 37 mm
0,173 kg
Measuring depth: Copper / iron /
live conductors (AC)
Detection range AC
Operating temperature
Storage temperature
Power supply
Dimensions (W x H x D)
Weight (incl. battery)
Technical data
Subject to technical alterations 06.2011.
Further safety and supplementary notices at:
www.laserliner.com/info
GB
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner TwinFinder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner TwinFinder in the language / languages: All languages as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info