646823
8
Zoom out
Zoom in
Previous page
1/92
Next page
08
==
5
AC Search
Hold the device in midair where it is far away from any electric
conductors that may be live.
Select the AC-Scan mode (Button 6). When this mode is
selected, the device performs an autonomous calibration
(AUTO-CALIBRATION). The device can be re-calibrated by pressing
the CAL button (7).
CAL-LED (3) illuminates continuously: Now a measurement can be
performed. The device will now detect live electric conductors con-
cealed under plaster, wood panels and other non-metallic cladding.
It is not possible to detect live wires in dry walls with metal studs.
Place the device against the wall.
Move the device slowly across the surface.
If electric wires or metal or plastic pipes are located near or in
contact with a plaster fibreboard panel, they may be identified
by the StarFinder as studs. Always switch off the power supply
when working near electric wires.
!
Tip 3: To avoid interference while scanning, keep your free hand and
other objects at least 15 cm away from the device.
Tip 4: The device only finds the outer edge of metal structures set
into the wall for doors, windows and corners. Afterwards search
for the other edge of the metal structure. Slide the device sideways
across the wall. When the maximum indication appears you have
reached the metal structure‘s edge.
Tip 5: Ensure that you have really detected a metal object. To do
so, check on both sides whether other metal objects are present at
equal distances, usually at 30, 40 or 60 cm. Also check that it is a
metal object by scanning at several places directly above and below
the position of the first find.
Tip 7: Textured ceilings: The ceiling must be covered with
cardboard to protect it. In this case, perform detection with maxi-
mum sensitivity, i.e. calibrate the device in mid-air.
GB
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner TwinFinder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner TwinFinder in the language / languages: All languages as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info