Manual Laserliner TwinFinder (page 7 of 92) (All languages)

646823

Zoom out

Zoom in

1/92

TwinFinder

Select measurement mode

Select METAL-Scan or AC-Scan with the Mode button (6). The mode

indicators (3) will show the presently set mode. For safety reasons,

the AC voltage warning is always active. The „Voltage (AC) found“

LED (4) lights up if a live line is located within the measuring range.

Metal Search

– Select METAL-SCAN (button 6).

– LED CAL (3) flashes: Press the CAL button (7) and wait until cali-

bration is completed. Hold the tool in the air so that it is pointing

away from any metal objects. Setting the mode allows the device

to achieve its maximum sensitivity. Refer also to Tip 1 about this.

– CAL-LED (3) illuminates continuously: Now a measurement can

be performed. The device is now able to detect metals (such as

reinforcing steel, heating pipes and water lines) that are concealed

under plaster, wood panels and other non-metallic cladding.

– Place the device against the wall.

– Move the device slowly across the surface.

– Because of its high sensitivity, the device can normally detect

objects in a broad radius beneath the relevant surface. If you want

to determine the actual centre of the hidden object, you must

move the device from both left and right towards the object. The

position between the two markings is the midpoint of the metal

object.

Tip 1: Sensitivity can be adjusted in order to locate an object more

precisely. Calibration to the surface is done by pressing the CAL

button (7) when the maximum indicator illuminates as the object is

approached. Then move the device further toward the object. Repeat

this procedure until the object is adequately localised.

Tip 2: The maximum indicator does not illuminate even though the

LED display reacts. When the strongest indication has been reached,

the device is in the vicinity of the metal object. Make a mark at this

location.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner TwinFinder in the language / languages: All languages as an attachment in your email.

The manual is 1,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laserliner TwinFinder Manual

Product: