646792

Laserliner Revolution Manual

22
Zoom out
Zoom in
Previous page
1/116
Next page
22
Sensor Automatic
The rotary laser aligns itself automatically. It is set to the required initial position (to
within an operating angle of ± 4°) and the automatic system then performs the neces-
sary fine adjustment, with three electronic measurement sensors detecting the X, Y and
Z axes.
Anti-Drift-System (ADS)
The anti-drift system (ADS) prevents erroneous or inaccurate measurements. How it
works: continuous monitoring of the alignment of the laser is activated 30 seconds after
the ADS is switched on. If the device moves due to the influence of external factors or
the laser loses its height reference, the laser will come to a standstill. The laser and the
tilt LED also start to flash rapidly. The device has to be switched off and on again in
order to continue using it. Erroneous and inaccurate measurements are thus prevented
simply and reliably. IMPORTANT: The ADS is not active following switch-on. Once the
device has been set up, press the tilt button to activate the ADS, enabling you to protect
the laser from changes in position caused by the device being disturbed by external
factors. The tilt LED flashes to indicate that the ADS function is active; see the diagram
below.
ON
External
influence
Adjustment phase
Sensor Automatic
ADS activation:
press the tilt
button; the tilt
LED flashes every
second.
The
laser
remains stationary as
a precaution; laser
and tilt LED flash
slowly.
ADS active after
30 seconds; tilt
LED flashes slowly.
Rotation
begins
Operating mode ADS:
L
Attention:
The ADS does not activate the monitoring function until 30 seconds after the laser
levelling procedure has been completed (set-up phase). The tilt LED flashes every
second during the set-up phase and flashes more slowly when the ADS is active.
GB
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner Revolution at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner Revolution in the language / languages: English, German, Dutch, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info