Manual Laserliner Revolution (page 20 of 116) (English, German, Dutch, French, Swedish, Norwegian, Finnish)

646792

Zoom out

Zoom in

1/116

Brief instructions

Initial switch-on Use the ON/OFF button to switch the device on. The

automatic sensor now levels the device horizontally and/

or vertically; the laser remains stationary and flashes

during this set-up phase. As soon as levelling is comple-

te, the laser starts to rotate at 750 rpm.

Hand receiver

mode

For working with the laser receiver (available as an

optional extra).

Rotary mode The following speeds can be set using the rotary button:

750, 350, 0 rpm

Spot mode You access spot mode by pressing the rotary button

repeatedly until the laser stops rotating. The laser can

then be positioned exactly at the measuring point by

means of the direction buttons.

Scan mode The scan button can be used to activate and set a light-

intensive segment in 4 different widths. You position the

segment via the direction buttons.

ADS tilt

function

This function protects the rotary laser from changes

in position caused by the device being disturbed by

external factors, thus preventing erroneous or inaccu-

rate measurements. Press the tilt button as soon as the

rotary laser has been aligned and the automatic sensor

is up and running. The tilt function becomes active after

around 30 seconds and the tilt LED starts to flash every

second. If the device then moves, it will switch itself off.

The laser and the tilt LED start to flash rapidly.

Anti-shake

function

The device can be set up really quickly with this func-

tion, which enables the laser to be set to a required

height, for example. It also means that the laser can

be used on vibrating surfaces and in windy conditions,

possibly in conjunction with the single slope function.

The laser will continue to rotate whilst the automatic

sensor is setting up the device. IMPORTANT: Precision is

adversely affected during the set-up phase.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner Revolution in the language / languages: English, German, Dutch, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 2,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laserliner Revolution Manual

Product: