646156
11
Zoom out
Zoom in
Previous page
1/64
Next page
Horizontal and vertical levelling:Turn the transport fastener (2) clockwise
and release the pendulum lock. Afterwards switch on the lasers (buttons 11,
12). Now the device can be levelled horizontally and vertically. If the device
is tilted too much and the pendulum is outside its self-levelling range, the
lasers will blink. In this case the device must be aligned with the fastening
screws (3) or alignment feet or the device must be placed on a surface that
is more level. The circular spirit level (13) can assist this orientation. The slope
function‘s indicator light (14) will be off.
L
IMPORTANT!
Turn the transport fastener (2) counter clockwise and switch off the laser to
transport (buttons 11, 12) the device. This will protect the pendulum system
from being damaged and switch off the device completely.
L
Important:
If the slope function‘s indicator light (14) blinks, horizontal and vertical
levelling cannot be done.
B
A
C
D
E
G
F
I
AutoCross-Laser 360° PowerBright
A
Power indicator
B
Switch accuracy
short range / long range
C
LED for accuracy
green / red
D
ON / OFF switch
E
Sound ON / OFF
F
Receiver field for laser beam
G
LED’s for Laserindication (front,
side, backside)
H
Universal mount
I
Battery compartment
(backside)
ENGLISH 11
H
Slope mode: Do not release the pendulum lock, turn the transport fasten-
er (2) counter clockwise. Now the slope function is inactive! Switch on the
lasers (buttons 11, 12). Now the slope function‘s indicator light (14) will blink
and pitches or slopes can be laid out.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner AutoCross-Laser 360 PowerBright at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner AutoCross-Laser 360 PowerBright in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info