Manual Laserliner AutoCross-Laser 360 PowerBright (page 9 of 64) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish, Finnish)

646156

Zoom out

Zoom in

1/64

AutoCross-Laser 360° PowerBright

ENGLISH 9

Super bright cross-line laser with 360° horizontal laser line

PowerBright-Laser: Special high-performance laser diodes project extremely

visible laser lines. The continuous horizontal 360° laser line is produced by 3

laser diodes, one vertical laser line. Magnetically-damped pendulum system

for automatic alignment, 2.5° self-levelling range. Pendulum can be locked for

protection during transport. The housing with removable device base and low-

lying laser modules is optimised for work near the ground. The laser lines are

easily positioned by virtue of the pivoted housing. Tilt mode permits gradients

to be laid out. Precision 2 mm/10 m. RX-Ready: The laser receiver, which is

available as an optional extra, can detect laser lines in a range of up to 50 m.

General safety instructions

Caution:

Do not look directly into the beam. Lasers must be kept out of

reach of children. Never intentionally aim the

device at people. This is a quality laser measuring

device and is 100% factory adjusted within the

stated tolerance. For reasons of product liability,

we must also draw your attention to the following: Regularly check the cali-

bration before use, after transport and after extended periods of storage. We

also wish to point out that absolute calibration is only possible in a specialist

workshop. Calibration by yourself is only approximate and the accuracy of

the calibration will depend on the care with which you proceed.

Note: This product is a precision instrument that must be handled and

treated with care. Avoid shocks and impact. Always keep and carry in the

case! Switch all lasers off and secure the pendulum. For cleaning, use a soft

cloth and glass cleaner.

Laser radiation!

Do not stare into the

beam or observe it directly

with optical instruments.

Laser class 2 M

EN60825-1:2007-10

Inserting the batteries

Open the battery compartment (9, I) and insert the batteries in accordance

with the installation symbols, ensuring the correct polarity. Close the cover.

Low battery charge: Replace the ACL 360° batteries when the illuminated vial

(13) flashes.

–

AutoCross-Laser 360°

PowerBright

RangeXtender

RX 51

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner AutoCross-Laser 360 PowerBright in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 2,18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Laserliner AutoCross-Laser 360 PowerBright Manual

Product: