646156

Laserliner AutoCross-Laser 360 PowerBright Manual

12
Zoom out
Zoom in
Previous page
1/64
Next page
Work positions: Fasten the device‘s upper section onto the pivoted device
base (4) to attach the device to a tripod or to position the vertical laser. When
lasers are to project out near ground level, the upper section should be taken
off of the device base.
Optional: Working with the laser
receiver RX 51:
For levelling over longer distances or in conditions of
bright light, use the laser receiver RX 51. Switch on with
button D; control lamp A will light up.
IMPORTANT: Set the ACL 360° to hand receiver mode
(button 10). The laser lines will now pulsate with high
frequency (5 kHz), making the laser lines darker. The
laser receiver can detect these pulsating laser lines up to
a maximum distance of 50 m.
Now move the receiver field (F) of the laser receiver
through the laser lines upwards and downwards (hori-
zontal laser line) and/or sideways (vertical laser line) until
the centre LED (G) lights up. Now mark the horizontal
and/or vertical reference dimension.
Adjust the sensitivity of the laser receiver with button B.
Green LED (C) for close-range working up to max. 15 m,
red LED (C) for distance-range working up to max. 50
m. The sound can be switched on or off with button E.
Note: To obtain maximum laser line visibility, hand receiver
mode for the ACL 360° must be switched off (button 10,
indicator light 15 off). In this condition the device cannot
be used with the laser receiver.
AutoCross-Laser 360° PowerBright
ENGLISH12
L
Note: The light intensity of the laser lines is greatest at the centre and
diminishes toward the ends. This also effects the maximum range of the
laser receiver: green LED max. 7 ... 15 m, red LED max. 25 ... 50 m. As a
consequence, the maximum reception range of horizontal 360° laser lines
radially is not consistent and diminishes at places where there is more
ambient light.
B
A
C
DE
G
F
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Laserliner AutoCross-Laser 360 PowerBright at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Laserliner AutoCross-Laser 360 PowerBright in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish, Finnish as an attachment in your email.

The manual is 2,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info