684847

Landmann 12970 - Triton 6.1 PTS plus Manual

11
Zoom out
Zoom in
Previous page
1/24
Next page
11
Triton PTS 6.1+
Main burner and infrared back burner
1. Open the lid on the barbecue unit.
Keep a safe distance from the burners during the
next few steps.
2. Press and hold the ignition button of the pulse
ignition (D). A slight crackling sound indicates
that the electronic pulse igniter is emitting sparks.
Press a flame regulator (B or A) and turn it anti-
clockwise to the "H" setting ("High").
If the gas fails to ignite within 5 seconds, turn the
flame regulators (5 x B) to "Off" position, wait for
3 minutes and repeat this step.
3. Ignite the other main burners (B) by repeating
step 2.
4. Close the lid of the grill unit and allow the barbe-
cue to heat up at full power.
5. Once the barbecue is heated up, turn the flame
regulator (B) to the desired heat output (flame
size).
6. You can now place your food on the cooking grill
(4+5) or hotplate (3). We recommend that you
wear barbecue mittens or other suitable gloves
for protection against the heat.
To switch off the burners (to extinguish the flame)
press and turn the flame regulators (B) clockwise to
"OFF".
The gas supply is not shut off until all the flame regu-
lators have been set to "OFF".
Igniting the side burner
Caution:
• Please note that a gas flame is often difficult
to see due to its blue colouring, particularly in
bright sunlight. For this reason:
– Only ignite the side burner when you need
it and place your cookware on the burner
straight away.
– Disconnect the gas supply before removing
your cookware.
• Only use cookware (pots or pans) on the side
burner that has been approved for use on gas
cooking appliances. Cookware that is unsuita-
ble for gas appliances may be damaged.
• Observe the maximum load capacity of the
side burner (see "Specifications"). Heavier
loads can damage the barbecue.
1. Open the side burner cover.
2. Check that the inner and outer side burner
ring (7+8) as well as the side burner support (12)
have been securely positioned.
You must not use the side burner (12) without the
side burner support.
3. Press and hold the ignition button of the pulse
ignition (D). A slight crackling sound indicates that
the electronic pulse igniter is emitting sparks. Press
a flame regulator (C) and turn it anti-clockwise to
the "H" ("High") setting.
If the gas fails to ignite within 5 seconds, turn the
flame regulator (C) to "Off" position, wait for 3
minutes and repeat this step.
4. Turn the flame regulator (C) to the desired heat
setting (flame size), place a pot or pan that is
approved for gas cooking appliances on the side
burner and heat up your food.
To switch off the side burner (extinguish the flame)
press and turn the flame regulator (C) clockwise to
"OFF".
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Landmann 12970 - Triton 6.1 PTS plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Landmann 12970 - Triton 6.1 PTS plus in the language / languages: English as an attachment in your email.

The manual is 3,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info