719228

Lanaform LA100207 Manual

11
Zoom out
Zoom in
Previous page
1/56
Next page
English 11 / 56
EN FR NL
of application required together with your
doctor.
When using the Medi Stim and when you ap-
ply the electrodes, you are advised to use two
electrodes per muscle group. For assistance,
see [
6].
Position the electrodes so that they surround
the muscle segments concerned. For opti-
mum eectiveness, the distance between
the electrodes should not be greater than ap-
prox. cm. The greater the distance chosen
between the electrodes, the greater will be the
volume of tissue stimulated. This applies to the
surface and the depth of the volume of tissue.
Likewise, the greater the distance between the
electrodes, the more the power stimulating
the tissue decreases. This means that if you opt
for a large distance between the electrodes,
the volume will be greater but stimulation less
so. To increase stimulation, you will then need
to increase the pulse intensity. The following
instructions apply when choosing the distance
between electrodes :
• The most appropriate dis-
tance: approx. 5 to 15cm
• Below 5cm, the primary surface
structures are strongly stimulated.
• Above 15cm, the deep structures
extending across the large surface
areas are very poorly stimulated.
We do not recommend using
two electrodes on opposite sides
of the centre of the body (for
example: the electrode of the
rst cable on your left arm and
the electrode of the second cable
on your right arm). See [
7].
Never apply the electrodes
to your head or pectorals. Never
move the electrodes when the
device is running. Switch o
the device, then simply remove
the electrodes and put them
in a dierent place, otherwise,
some impact might be felt.
Operating the device
• Once the electrodes are in position in the
area you want to treat, switch on your
device with the
o n/off
button [
1
3].
• Press the
tens
button to switch to
the TENS mode or the
e ms
button to
switch to the EMS mode [
1
6 or 9].
• Press the
tens
or
e ms
button again
once or several times, depending on the
mode chosen, until the number of the
programme required is displayed [
3
7].
• In the TENS mode, press the
e ms
button
to enter the EMS mode, the screen
will display EMS programme 1 and
the intensity will be lower. Likewise,
in the EMS mode, press the
tens
button to enter the TENS mode.
• Once the mode and the programme
are selected, press
+
to activate
electro-stimulation [
1
2 and/or 7].
This sets o the lowest intensity.
• The clock indicator shows that elec-
tro-stimulation is underway [
3
2].
• During electro-stimulation, press
+
again until the required intensity
is reached and
-
to reduce the
intensity [
1
4 and 8]. There are 20
possible intensities per programme.
With each variation, the intensity of
the channel increases or decreases
by 1mA and the amplitude by 1V.
E-IM-MediStim-001.indd 11 19/12/2017 14:45:35
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Lanaform LA100207 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Lanaform LA100207 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info